Hitachi Compute Blade 2000 User Manual page 1335

The following table describes each item on this screen.
# Title Official
Name
(1) Select Level Level
selection
(2) Pages Page
(3) Level Level
(4) Date Date
(5) Time Time
(6) Event Event
(7) PageUp / PageUp /
PageDown PageDown
(8) Error event Error event
detected detection
(1) How to check the details of an event occurred in LPAR manager
Display the LP System Logs screen.
Place the cursor on Select Level in the upper-right hand and press Enter to display
a subscreen for selecting an LP system log level. Place the cursor on the level of
the LP system log to display and press Enter. To display the details of the relevant
LP system log, place the cursor on the title of the LP system log to check and press
Enter.
If the LP system log cannot be included in one page, scroll up or down using the
Page Up or Page Down keys.
To analysis faults, we might check the messages displayed on the LP System Logs
screen.
Description
Specifies the level of the LP system log to display. The
initial setting is for all levels (All level) to be displayed.
Error: displays error level problems. If you select this
item, "Error only" will be displayed.
Error/Warn: Displays warnings and more serious
problems. If you select this item, "Over warning" will be
displayed.
Error/Warn/Info: displays all logs. If you select this item,
"All level" will be displayed.
Displays the system log page information.
Numerator: Displays the page number of the system log
currently displayed.
Denominator: Displays the total number of pages of the
system logs.
This item is displayed when the system log of two pages
or more is retained.
Displays the level of the LP system log.
Error: Indicates an error.
Warn: Indicates a warning.
Info.: Indicates information.
Displays the date when the LP system log was collected. -
Displays the time when the LP system log was collected. -
Displays the event of the LP system log.
Page Up: Scrolls a page up for the screen display.
Page Down: Scrolls a page down for the screen display.
This item is displayed when the system log of two pages
or more is retained.
Displays that LP system logs at the error level are
detected.
When this is displayed, check the LP system log in the
LP System Logs screen.
See LP system logs for checking LP system logs.
To delete this display, press the Esc key with this screen
or open the system logs screen.
1284
Initial Value
All level
-
-
-
-
-