Hitachi Compute Blade 2000 User Manual page 1263

(8) How to change the transmission bandwidth limitation for VF NIC (for LPAR
manager firmware 59-7X/79-7X or later versions)
Display the Virtual NIC Assignment screen.
Place the cursor at an item where an LPAR line crosses a VNIC number column,
and press [F9]: Set TXRATE to display the subscreen. Select a numeric value to
change, and press the [Enter] key.
When pressing F1 on the subscreen, you can enter a numeric value by the 100
Mbps.
+------------------------------------------------------------------------------+
|+- Virtual NIC Assignment ---------------------------------------------------+|
||
||
|| # Name Sta #VNIC Device 0
|| 1 LPAR1 Dea +--------------------------------+ *
|| 2 LPAR2 Dea |
|| 3 |
|| 4 |
|| 5 |
|| 6 |
|| 7 |
|| 8 |
|| 9 |
|| 10 | Max TXRATE :
|| |
|+---------------------+--------------------------------+---------------------+|
|+-VNIC Information----| F1:Input number in Mbps
|| No: 0 MAC Address: +--------------------------------+ Tag: Undef Prm: R ||
|| Inter-LPAR Packet Filtering: Disable
|| VLANID:
++----------------------------------------------------------------------------++
| F2:Disp F5:Set Prom. Mode F6:Change MAC Addr F7:Select VLAN
| F8:Packet Filter F9:Set TXRATE F11:Left F12:Right
+------------------------------------------------------------------------------+
Virtual NIC Number
1 2 3 4 5
Set TXRATE of VF (in Mbps) | *
|
+1000 |
|
+100 00010000 -100 |
|
-1000 |
|
10000 Mbps |
|[PageDown]:Page Down ||
|---------------------+|
TXRATE:
1212
||
||
6 7 ||
* * ||
* * ||
||
||
||
||
||
||
||
||
||
10000 Mbps ||
|
Esc:Menu |