Hitachi Compute Blade 2000 User Manual page 603

Item Description of item
Synchronize Apply the management
module setting to the switch
module
Select a menu item from the following list to execute it.
Menu
Edit all switch module
A.
setting.
Edit one switch module
N.
setting.
Show the switch module
S.
current network setting.
Synchronize network
W.
setting to switch module.
Q. Quit
If you enter A and press Enter, the prompt for setting the switch module connection is
ready. Enter a setting value and press Enter, and then go to the next setting.
When you set the Ext setting to Int or LOSW, the other settings of the switch module
are automatically filled in.
When you set the Ext setting to Ext and the Synchronize setting to No, the other
settings of the switch module are automatically filled in.
When you set the Ext setting to Ext, the Synchronize setting to Yes, and IP address to
0.0.0.0, the other settings of the switch module are automatically filled in.
Then the new setting value is displayed. A message to confirm the setting is displayed.
At the prompt, enter Y and press Enter, and the network setting is saved in the switch
module. To cancel the setting, enter N and press Enter or just press Enter to confirm.
Value
Yes Applies the setting held by the
management to the switch
module.
- No switch module installed
or
- Interface to view and update the
Yes! Applies the setting held by the
management to the switch
module.
- Interface to view and update the
Does not apply the setting held by
No
the management module to the
switch module.
------- Internal connection is set.
Description
Sets the network setting of all switch modules.
Edits the network setting of the individual switch module.
Displays the current setting of the switch module.
Applies the setting held by the management module to the
switch module.
Returns to the previous menu.
552
Description of value
management interface LAN
setting is supported by the
switch module and the switch
module and management
module have the same setting.
management interface LAN
setting is supported by the
switch module and the switch
module and management
module have the different
settings.