Download  Print this page

Hitachi Compute Blade 500 Series Function Manual

Lan advanced function manual (for intel)
Hide thumbs

Advertisement

Hitachi Compute Blade 500 series
LAN Advanced Function Manual (for Intel)
F
F
L
A ST
IN D
IN KS
Getting Help
Contents
MK-91CB500033-03

Advertisement

Table of Contents
loading

  Summary of Contents for Hitachi Compute Blade 500 Series

  • Page 1 Hitachi Compute Blade 500 series LAN Advanced Function Manual (for Intel) A ST IN D IN KS Getting Help Contents MK-91CB500033-03...
  • Page 2 Hitachi, Ltd. Hitachi, Ltd., reserves the right to make changes to this document at any time without notice and assumes no responsibility for its use. This document contains the most current information available at the time of publication.
  • Page 3: Table Of Contents

    LAN Advanced Functions ................ 2-1 Teaming and Tag VLAN Setting (for Windows Server 2008) ........2-9 Teaming and Tag VLAN Setting (for Windows Server 2008 R2) ......2-41 Contents Hitachi Compute Blade 500 Series LAN Advanced Function Manual (for Intel)
  • Page 4 Contents Hitachi Compute Blade 500 Series LAN Advanced Function Manual (for Intel)
  • Page 5: Preface

    Getting Help  Comments  Notice: The use of Compute Blade 500 series and all other Hitachi Data Systems products is governed by the terms of your agreement(s) with Hitachi Data Systems. Preface Hitachi Compute Blade 500 Series LAN Advanced Function Manual (for Intel)
  • Page 6: Intended Audience

    Indicates optional values. Example: [ a | b ] indicates that you can choose a, b, or nothing. { } braces Indicates required or expected values. Example: { a | b } indicates that you must choose either a or b. Preface Hitachi Compute Blade 500 Series LAN Advanced Function Manual (for Intel)
  • Page 7 This indicates notes not directly related to injury or severe damage to Note equipment. This indicates advice on how to make the best use of the equipment. Preface Hitachi Compute Blade 500 Series LAN Advanced Function Manual (for Intel)
  • Page 8: Getting Help

    Getting Help The Hitachi Data Systems customer support staff is available 24 hours a day, seven days a week. If you need technical support log on to the Hitachi Data Systems Portal for contact information: https://hdssupport.hds.com. Comments Please send us your comments on this document: doc.comments@hds.com.
  • Page 9: Updating Lan Driver

    “Driver and Utility for Windows” DVD-ROM. Procedure on Windows Server 2008 (32 bit)/(64 bit) or Windows Server  2008 R2 Procedure on Windows Server 2012  Updating LAN driver Hitachi Compute Blade 500 Series LAN Advanced Function Manual (for Intel)
  • Page 10: Procedure On Windows Server 2008 (32 Bit)/(64 Bit) Or Windows Server 2008 R2

    2. On the [Device Manager] screen, right-click the LAN device and select [Update Driver Software...] from the menu. 3. When the following screen is displayed, click [Browse my computer for driver software] button. Updating LAN driver Hitachi Compute Blade 500 Series LAN Advanced Function Manual (for Intel)
  • Page 11 Windows Server 2008 64-bit D:\GC0x1\Win2008\Drivers\LAN\INTEL_01\x64 * Windows Server 2008 R2 D:\GC0x1\Win2008R2\Drivers\LAN\INTEL_01\x64 * *: A part of the directory path "GC0x1" varies depending on server blade model Updating LAN driver Hitachi Compute Blade 500 Series LAN Advanced Function Manual (for Intel)
  • Page 12 5. When the following screen is displayed, click the [Close] button. When updating another adapter’s LAN driver, repeat step 2 through 5. Updating LAN driver Hitachi Compute Blade 500 Series LAN Advanced Function Manual (for Intel)
  • Page 13: Procedure On Windows Server 2012

    LPAR are detected by the guest OS. 2. Select [Tools]-[Computer Management] in Server Manager Window. Computer Management window is displayed. 3. Select [Device Manager]. Updating LAN driver Hitachi Compute Blade 500 Series LAN Advanced Function Manual (for Intel)
  • Page 14 4. Double-click the "Intel(R) 82576 Gigabit Dual Port Network Connection" adapter to update in "Network adapters". The property window is displayed. 5. Select [Driver] tab and then click [Update Driver] button. Update Driver Software window is displayed. Updating LAN driver Hitachi Compute Blade 500 Series LAN Advanced Function Manual (for Intel)
  • Page 15 The location of the LAN driver software for Windows Server 2012 is shown in the following table with the example when the DVD-ROM drive is drive (D:). Location of the LAN driver Windows Server 2012 D:\WinSrv2012\Drivers\NIC\IntelNIC_02\x64 Updating LAN driver Hitachi Compute Blade 500 Series LAN Advanced Function Manual (for Intel)
  • Page 16 "Confirm Device Uninstall" is displayed. Next, click [OK] button. Don't check the check box "Delete the driver software for this device" in Confirm Device Uninstall window. Updating LAN driver Hitachi Compute Blade 500 Series LAN Advanced Function Manual (for Intel)
  • Page 17 Management window. If "!" for a network adapter is displayed, right-click the network adapter. Next, disable the network adapter and then enable the network adapter again. Updating LAN driver Hitachi Compute Blade 500 Series LAN Advanced Function Manual (for Intel)
  • Page 18 1-10 Updating LAN driver Hitachi Compute Blade 500 Series LAN Advanced Function Manual (for Intel)
  • Page 19: Lan Advanced Functions

    This chapter describes the supported functions and their setting methods.  Teaming and Tag VLAN Setting (for Windows Server 2008)  Teaming and Tag VLAN Setting (for Windows Server 2008 R2) LAN Advanced Functions Hitachi Compute Blade 500 Series LAN Advanced Function Manual (for Intel)
  • Page 20 Feature the logical segmentation. -Connected HUB: Switching HUB compliant with IEEE802.1q VLAN Condition -Available groups: Up to ten groups (ID: 1-4094) per system -Supported protocol: IP LAN Advanced Functions Hitachi Compute Blade 500 Series LAN Advanced Function Manual (for Intel)
  • Page 21 When the AFT function is used, LAN device priorities (Primary and Secondary) are not defined by default. See How to set LAN device priorities, for details. LAN Advanced Functions Hitachi Compute Blade 500 Series LAN Advanced Function Manual (for Intel)
  • Page 22 When the ALB function is used, LAN device priorities (Primary and Secondary) are not defined by default. See How to set LAN device priorities, for details. LAN Advanced Functions Hitachi Compute Blade 500 Series LAN Advanced Function Manual (for Intel)
  • Page 23 When the SFT function is used, LAN device priorities (Primary and Secondary) are not defined by default. See How to set LAN device priorities, for details. LAN Advanced Functions Hitachi Compute Blade 500 Series LAN Advanced Function Manual (for Intel)
  • Page 24 VLAN3 Up to 10 VLAN groups can be defined for one system equipment. If you configure TagVLAN, you must specify VLAN for all the related networks. LAN Advanced Functions Hitachi Compute Blade 500 Series LAN Advanced Function Manual (for Intel)
  • Page 25 LAN device and the secondary LAN device, it might repeat to failover or failback. Disable the probing packet. See "How to Disable Monitoring Packet (AFT/ALB)", for details. The SFT function does not transmit the probing packet. LAN Advanced Functions Hitachi Compute Blade 500 Series LAN Advanced Function Manual (for Intel)
  • Page 26 Confirm that the teaming and Tag VLAN is set(or removed) in [Device Manager] and check that communication can be properly done via the adapter that Tag VLAN was set to. LAN Advanced Functions Hitachi Compute Blade 500 Series LAN Advanced Function Manual (for Intel)
  • Page 27: Teaming And Tag Vlan Setting (For Windows Server 2008)

    Location of Tool for LAN Redundancy Windows Server 2008 32-bit D:\GC0x1\Win2008\Utility\PROSetDX\APPS\PROSETDX\Win32\DxSetup.exe Windows Server 2008 64-bit D:\GC0x1\Win2008\Utility\PROSetDX\APPS\PROSETDX\Winx64\DxSetup.exe *: A part of the directory path "GC0x1" varies depending on server blade model LAN Advanced Functions Hitachi Compute Blade 500 Series LAN Advanced Function Manual (for Intel)
  • Page 28 2. Read the License Agreement Terms. Check “I accept the terms in the license agreement” when you agree to the terms. Then click the [Next] button. 2-10 LAN Advanced Functions Hitachi Compute Blade 500 Series LAN Advanced Function Manual (for Intel)
  • Page 29 5. Click “Finish,” and then reboot the system. There is no problem if a warning message “WMI” is registered in the event log after installing Intel PROSet. LAN Advanced Functions 2-11 Hitachi Compute Blade 500 Series LAN Advanced Function Manual (for Intel)
  • Page 30 1. Double-click [Device Manager] in [Control Panel]. 2. Double-click a network adapter that you need to set as shown below. 3. Network adapter properties are displayed. 2-12 LAN Advanced Functions Hitachi Compute Blade 500 Series LAN Advanced Function Manual (for Intel)
  • Page 31 5. The New Team Wizard screen is displayed. Click the [Next] button. There is no problem if a warning message “WMI” is registered in the event log after installing Intel PROSet. LAN Advanced Functions 2-13 Hitachi Compute Blade 500 Series LAN Advanced Function Manual (for Intel)
  • Page 32 To set Fault Tolerance, select “Adapter Fault Tolerance.”  To set Load Balancing, select “Adaptive Load Balancing.”  To set Switch Fault Tolerance, select “Switch Fault Tolerance.”  2-14 LAN Advanced Functions Hitachi Compute Blade 500 Series LAN Advanced Function Manual (for Intel)
  • Page 33 LAN devices used in this server blade support four functions only: Adapter Fault Tolerance, Adaptive Load Balancing, and Switch Fault Tolerance. Therefore, do not select other functions except those three. LAN Advanced Functions 2-15 Hitachi Compute Blade 500 Series LAN Advanced Function Manual (for Intel)
  • Page 34 On the [Device Manager] screen, right-click the LAN device that is set to a team and select [Properties] from the menu. Click the [Link Speed] tab, find [Link Status], and confirm if the LAN device is running properly. 2-16 LAN Advanced Functions Hitachi Compute Blade 500 Series LAN Advanced Function Manual (for Intel)
  • Page 35 “How to Disable [Receive Load Balancing]”. 11. When setting AFT/ALB/SFT teams, follow the procedure in “ How to Change Activation ” to change the activation delay setting. Delay LAN Advanced Functions 2-17 Hitachi Compute Blade 500 Series LAN Advanced Function Manual (for Intel)
  • Page 36 [Local Area Connection] added while setting the advanced LAN function is enabled as an IP address. To change the IP address, from [Properties] in [Local Area Connection], select [Network Protocol (TCP/IP)] and then [Properties]. 2-18 LAN Advanced Functions Hitachi Compute Blade 500 Series LAN Advanced Function Manual (for Intel)
  • Page 37 When you compose a team of different LAN adapters, values to those LAN adapters to join the team may be changed to the optimal ones. LAN Advanced Functions 2-19 Hitachi Compute Blade 500 Series LAN Advanced Function Manual (for Intel)
  • Page 38 How to Set LAN Device Priorities: Primary/Secondary 1. Select and double-click [TEAM: Team #x] in the [Device Manager] screen. 2. The [TEAM: Team #x Properties] screen appears. 2-20 LAN Advanced Functions Hitachi Compute Blade 500 Series LAN Advanced Function Manual (for Intel)
  • Page 39 The primary LAN device may be switched, which may cause improper operation. This may occur when the confirmation packet is not set to Disabled in the AFT or ALB setting. LAN Advanced Functions 2-21 Hitachi Compute Blade 500 Series LAN Advanced Function Manual (for Intel)
  • Page 40 “Not Set” is shown in Priority. 5. Primary description is added to the network adapter in [Adapters in Team] as shown below. 6. Click the [OK] button. 2-22 LAN Advanced Functions Hitachi Compute Blade 500 Series LAN Advanced Function Manual (for Intel)
  • Page 41 [Receive Load Balancing] from Settings, and then set the value to Disabled. Execute this step on all Adaptive Load Balancing teams. 3. Click the [OK] button. LAN Advanced Functions 2-23 Hitachi Compute Blade 500 Series LAN Advanced Function Manual (for Intel)
  • Page 42 1. Double-click [TEAM: Team #x] in the [Device Manager] screen. 2. In the [TEAM: Team #x Properties] screen, click the [Advanced] tab. Select [Probes] from Settings, and click the [Properties] button. 2-24 LAN Advanced Functions Hitachi Compute Blade 500 Series LAN Advanced Function Manual (for Intel)
  • Page 43 When making a team: AFT, ALB, SFT, set [Activation Delay] to [3] seconds or more. 1. Double-click [TEAM: Team #x] in the [Device Manager] screen. LAN Advanced Functions 2-25 Hitachi Compute Blade 500 Series LAN Advanced Function Manual (for Intel)
  • Page 44 [Settings] > [Activation Delay] and then set the value to 3 or more seconds. For SFT team, there is no problem if the setting is the default value: 60 seconds. 3. Click the [OK] button. 2-26 LAN Advanced Functions Hitachi Compute Blade 500 Series LAN Advanced Function Manual (for Intel)
  • Page 45 1. Double-click [TEAM: Team #x] in the [Device Manager] screen. 2. In the [TEAM: Team # Properties] screen, click the [Advanced] tab, select [Connection Monitoring] from the [Settings] pane, and click [Properties]. LAN Advanced Functions 2-27 Hitachi Compute Blade 500 Series LAN Advanced Function Manual (for Intel)
  • Page 46 4. Type the IP address of the target PC for ARP monitoring in the [Add New IP] field, and click [Add]. Then the IP address will be added to the [Target IP] pane. 2-28 LAN Advanced Functions Hitachi Compute Blade 500 Series LAN Advanced Function Manual (for Intel)
  • Page 47 5. To delete a target IP, select the target IP to remove, and click [Remove]. 6. When the settings you need are completed, click [OK]. 7. Click [OK] to return to the [TEAM: Team # Properties] screen. LAN Advanced Functions 2-29 Hitachi Compute Blade 500 Series LAN Advanced Function Manual (for Intel)
  • Page 48 How to Remove Team 1. Double-click [TEAM: Team #x] in the [Device Manager] screen. 2. Click the [Settings] tab, and then click the [Remove Team] button. 2-30 LAN Advanced Functions Hitachi Compute Blade 500 Series LAN Advanced Function Manual (for Intel)
  • Page 49 Description: The server was unable to allocate from the system nonpaged pool because the pool was empty. Check whether or not the resource is short when this error event is recorded. LAN Advanced Functions 2-31 Hitachi Compute Blade 500 Series LAN Advanced Function Manual (for Intel)
  • Page 50 1. Double-click [Device Manager] in [Control Panel]. 2. Select and double-click a network adapter that you want to set VLAN. 3. Network adapter properties are displayed. 2-32 LAN Advanced Functions Hitachi Compute Blade 500 Series LAN Advanced Function Manual (for Intel)
  • Page 51 [OK] button. A [VLAN ID] value should be the same as the switching HUB setting value. When setting a Tag VLAN, the switching HUB that is connected to the system should support IEEE802.1q VLAN. LAN Advanced Functions 2-33 Hitachi Compute Blade 500 Series LAN Advanced Function Manual (for Intel)
  • Page 52 VLAN on the network adapter. If [!] is added to the network adapter whose setting is changed with the device manager, reboot the OS to use the adapter. 2-34 LAN Advanced Functions Hitachi Compute Blade 500 Series LAN Advanced Function Manual (for Intel)
  • Page 53 There is no problem in operation. Check if LAN devices in the team that Tag VLAN is configured operate properly. LAN Advanced Functions 2-35 Hitachi Compute Blade 500 Series LAN Advanced Function Manual (for Intel)
  • Page 54 1. Double-click [VLAN: VLANx] in the [Device Manager] screen. 2. Click the [Settings] tab and then the [Remove VLAN] button. 3. When the following screen appears, click the [Yes] button. 2-36 LAN Advanced Functions Hitachi Compute Blade 500 Series LAN Advanced Function Manual (for Intel)
  • Page 55 Description: The server was unable to allocate from the system nonpaged pool because the pool was empty. Check whether or not the resource is short when this error event is recorded. LAN Advanced Functions 2-37 Hitachi Compute Blade 500 Series LAN Advanced Function Manual (for Intel)
  • Page 56 [VID=<VLAN ID>] removed from team has been removed from the team. #<team ID>. 38 (I) Adapter removed from team #<ID>. The LAN device has been removed from the team. 2-38 LAN Advanced Functions Hitachi Compute Blade 500 Series LAN Advanced Function Manual (for Intel)
  • Page 57 Intel 82576 Gigabit Dual Port Network Connection  Event ID 12: Information Secondary Adapter took over: <member description>: Intel 82576 Gigabit Dual Port Network Connection #2 LAN Advanced Functions 2-39 Hitachi Compute Blade 500 Series LAN Advanced Function Manual (for Intel)
  • Page 58 It will be linked up in a second or two after detecting the linkdown. With a redundancy configuration using a team, LAN devices will be switched. 2-40 LAN Advanced Functions Hitachi Compute Blade 500 Series LAN Advanced Function Manual (for Intel)
  • Page 59: Teaming And Tag Vlan Setting (For Windows Server 2008 R2)

    Close all windows before starting installation. When installing the Intel PROSet, log in as an administrator account. 1. When the following screen appears, click the [Next] button. LAN Advanced Functions 2-41 Hitachi Compute Blade 500 Series LAN Advanced Function Manual (for Intel)
  • Page 60 5. Click “Finish,” and then reboot the system. No problem if a warning message “WMI” is recorded in the event log after installing Intel PROSet. 2-42 LAN Advanced Functions Hitachi Compute Blade 500 Series LAN Advanced Function Manual (for Intel)
  • Page 61 2. Click [Device Manager] in [Device and Printer]. 3. Double-click a network adapter that you need to set as shown below. 4. Network Connection Properties are displayed. LAN Advanced Functions 2-43 Hitachi Compute Blade 500 Series LAN Advanced Function Manual (for Intel)
  • Page 62 6. The New Team Wizard screen is displayed. Click the [Next] button. Give a name to a team as you like. “Team #x (x stands for a number.)” is the default setting. 2-44 LAN Advanced Functions Hitachi Compute Blade 500 Series LAN Advanced Function Manual (for Intel)
  • Page 63 To set Fault Tolerance, select “Adapter Fault Tolerance.”  To set Load Balancing, select “Adaptive Load Balancing.”  To set Switch Fault Tolerance, select “Switch Fault Tolerance.”  LAN Advanced Functions 2-45 Hitachi Compute Blade 500 Series LAN Advanced Function Manual (for Intel)
  • Page 64 LAN devices used in this server blade support four functions only: Adapter Fault Tolerance, Adaptive Load Balancing, and Switch Fault Tolerance. Therefore, do not select other functions except those three. 2-46 LAN Advanced Functions Hitachi Compute Blade 500 Series LAN Advanced Function Manual (for Intel)
  • Page 65 On the [Device Manager] screen, right-click the LAN device that is set to a team and select [Properties] from the menu. Click the [Link Speed] tab, find [Link Status], and check if the LAN device is running properly. LAN Advanced Functions 2-47 Hitachi Compute Blade 500 Series LAN Advanced Function Manual (for Intel)
  • Page 66 13. When you need the ARP monitoring in setting an SFT team with Intel(R) PROSet 15.8.76.0, perform How to Set Connection Monitoring. 14. When creating another team, repeat step 3 through 12. 2-48 LAN Advanced Functions Hitachi Compute Blade 500 Series LAN Advanced Function Manual (for Intel)
  • Page 67 Connection] added while setting the advanced LAN function is enabled as an IP address. To change the IP address, from [Properties] in [Local Area Connection], select [Network Protocol (TCP/IP)] and then [Properties]. LAN Advanced Functions 2-49 Hitachi Compute Blade 500 Series LAN Advanced Function Manual (for Intel)
  • Page 68 You can find the status of LAN devices that have been teamed in system logs of the event viewer. When a team consists of different LAN devices, the setting values of LAN devices in the team may be optimized. 2-50 LAN Advanced Functions Hitachi Compute Blade 500 Series LAN Advanced Function Manual (for Intel)
  • Page 69 How to Set LAN Device Priorities: Primary/Secondary 1. Select and double-click [TEAM: Team #x] in the [Device Manager] screen. 2. The [TEAM: Team #x Properties] screen appears. LAN Advanced Functions 2-51 Hitachi Compute Blade 500 Series LAN Advanced Function Manual (for Intel)
  • Page 70 4. Select a network adapter you want to specify as a Primary LAN device. Then click the [Set Primary] button and the [OK] button. If the primary setting is not set, it is automatically decided and displayed as “Not Set.” 2-52 LAN Advanced Functions Hitachi Compute Blade 500 Series LAN Advanced Function Manual (for Intel)
  • Page 71 5. Primary description is added to the network adapter in [Adapters in Team] as shown below. 6. Click the [OK] button. LAN Advanced Functions 2-53 Hitachi Compute Blade 500 Series LAN Advanced Function Manual (for Intel)
  • Page 72 [Receive Load Balancing] from Settings, and then set the value to Disabled. Execute this step on all Adaptive Load Balancing teams. 3. Click the [OK] button. 2-54 LAN Advanced Functions Hitachi Compute Blade 500 Series LAN Advanced Function Manual (for Intel)
  • Page 73 1. Double-click [TEAM: Team #x] in the [Device Manager] screen. 2. In the [TEAM: Team #x Properties] screen, click the [Advanced] tab. Select [Probes] from Settings, and click the [Properties] button. LAN Advanced Functions 2-55 Hitachi Compute Blade 500 Series LAN Advanced Function Manual (for Intel)
  • Page 74 When making a team: AFT, ALB, SFT, set [Activation Delay] to [3] seconds or more. 1. Double-click [TEAM: Team #x] in the [Device Manager] screen. 2-56 LAN Advanced Functions Hitachi Compute Blade 500 Series LAN Advanced Function Manual (for Intel)
  • Page 75 [Settings] > [Activation Delay] and then set the value to 3 or more seconds. For SFT team, there is no problem if the setting is the default value: 60 seconds. 3. Click the [OK] button. LAN Advanced Functions 2-57 Hitachi Compute Blade 500 Series LAN Advanced Function Manual (for Intel)
  • Page 76 1. Double-click [TEAM: Team #x] in the [Device Manager] screen. 2. In the [TEAM: Team # Properties] screen, click the [Advanced] tab, select [Connection Monitoring] from the [Settings] pane, and click [Properties]. 2-58 LAN Advanced Functions Hitachi Compute Blade 500 Series LAN Advanced Function Manual (for Intel)
  • Page 77 4. Type the IP address of the target PC for ARP monitoring in the [Add New IP] field, and click [Add]. Then the IP address will be added to the [Target IP] pane. LAN Advanced Functions 2-59 Hitachi Compute Blade 500 Series LAN Advanced Function Manual (for Intel)
  • Page 78 5. To delete a target IP, select the target IP to remove, and click [Remove]. 6. When the settings you need are completed, click [OK]. 7. Click [OK] to return to the [TEAM: Team # Properties] screen. 2-60 LAN Advanced Functions Hitachi Compute Blade 500 Series LAN Advanced Function Manual (for Intel)
  • Page 79 How to Remove Team 1. Double-click [TEAM: Team #x] in the [Device Manager] screen. 2. Click the [Settings] tab, and then click the [Remove Team] button. LAN Advanced Functions 2-61 Hitachi Compute Blade 500 Series LAN Advanced Function Manual (for Intel)
  • Page 80 When a team is set as a network device to use in another application, make sure to remove the team from the application settings 2-62 LAN Advanced Functions Hitachi Compute Blade 500 Series LAN Advanced Function Manual (for Intel)
  • Page 81 2. Click [Device Manager] in [Device and Printer]. 3. Select and double-click a network adapter that you want to set VLAN. 4. Network adapter properties are displayed. LAN Advanced Functions 2-63 Hitachi Compute Blade 500 Series LAN Advanced Function Manual (for Intel)
  • Page 82 [OK] button. The [VLAN ID] should be the same as the switching HUB setting value. When setting a Tag VLAN, the switching HUB that is connected to the system should support IEEE802.1q VLAN. 2-64 LAN Advanced Functions Hitachi Compute Blade 500 Series LAN Advanced Function Manual (for Intel)
  • Page 83 Check the network adapter with the changed setting using the device manager. If [!] is displayed, reboot the OS to use the adapter. LAN Advanced Functions 2-65 Hitachi Compute Blade 500 Series LAN Advanced Function Manual (for Intel)
  • Page 84 Two same team names may be displayed in the [Network Connection] screen immediately after setting VLAN. Update the display after a while, and it is properly displayed. 2-66 LAN Advanced Functions Hitachi Compute Blade 500 Series LAN Advanced Function Manual (for Intel)
  • Page 85 There is no problem in operation. Check if LAN devices in the team where Tag VLAN is configured operate properly. LAN Advanced Functions 2-67 Hitachi Compute Blade 500 Series LAN Advanced Function Manual (for Intel)
  • Page 86 How to Remove Tag VLAN 1. Double-click [VLAN: VLANx] in the [Device Manager] screen. 2. Click the [Settings] tab and then the [Remove VLAN] button. 2-68 LAN Advanced Functions Hitachi Compute Blade 500 Series LAN Advanced Function Manual (for Intel)
  • Page 87 [Properties] from the menu. Click the [Link Speed] tab, find [Link Status], and check if the LAN device is running properly. LAN Advanced Functions 2-69 Hitachi Compute Blade 500 Series LAN Advanced Function Manual (for Intel)
  • Page 88 [VID=<VLAN ID>] removed from team has been removed from the team. #<team ID>. 38 (I) Adapter removed from team #<ID>. The LAN device has been removed from the team. 2-70 LAN Advanced Functions Hitachi Compute Blade 500 Series LAN Advanced Function Manual (for Intel)
  • Page 89 Current Primary Adapter is switching from: Intel(R) 82576 Gigabit Dual Port Network Connection  Event ID 12: Information Secondary Adapter took over: Intel(R) 82576 Gigabit Dual Port Network Connection #2 LAN Advanced Functions 2-71 Hitachi Compute Blade 500 Series LAN Advanced Function Manual (for Intel)
  • Page 90 It will be linked up in a second or two after detecting the linkdown. With a redundancy configuration using a team, LAN devices will be switched. 2-72 LAN Advanced Functions Hitachi Compute Blade 500 Series LAN Advanced Function Manual (for Intel)
  • Page 91 Hitachi Compute Blade 500 Series LAN Advanced Function Manual (for Intel)
  • Page 92 Hitachi Data Systems Corporate Headquarters 2845 Lafayette Street Santa Clara, California 95050-2639 U.S.A. www.hds.com Regional Contact Information Americas +1 408 970 1000 info@hds.com Europe, Middle East, and Africa +44 (0) 1753 618000 info.emea@hds.com Asia Pacific +852 3189 7900 hds.marketing.apac@hds.com MK-91CB500033-03...