System Web Console - Hitachi Compute Blade 2000 User Manual

System web console

This section describes the system web console.
Functionality of the system web
console
The Compute Blade 2000 Management Module's system web console provides a
GUI interface for controlling a variety of Compute Blade 2000 features from a web
browser on a client PC.
 Items to prepare
Client PC (hereafter referred to as "Client")
LAN cable (UTP-5 or better)
Table 6-1 describes the client requirements for using the system web console
feature.
#
1 OS
2 Browser
3 Display resolution
 Client settings
Ensure that you perform the following settings.
Check the browser settings on the client before using the system web console.
The system web console may not work properly if the browser is not set up in the
correct way.
Ensure that the proxy server settings allow connections to the management module.
Ensure that the browser is configured to download and run JavaScript.
Add the IP address of the management module to the list of trusted sites.
Disable any pop-up blocking features of the browser.
Ensure that the browser is set up to display images.
Ensure that cookies are enabled.
For Internet Explorer 8 or higher, enable Compatibility View.
Table 6-1: Client Requirement
Item
Microsoft® Windows® Server 2008, Standard Edition
Microsoft® Windows® Server 2008, Enterprise Edition
Microsoft® Windows® Server 2003 R2, Standard Edition
Microsoft® Windows® Server 2003 R2, Enterprise Edition
Microsoft® Windows® Server 2003, Standard Edition
Microsoft® Windows® Server 2003, Enterprise Edition
Microsoft® Windows® XP Professional
Microsoft® Windows® 2000 Professional
Microsoft® Windows® Vista Business
Internet Explorer 6.0 or later versions
(Tab functions of the browser, however, are not available.)
800 x 600 or later with 65536 or more colors
(1280 x 1024 or later is recommended.)
658
Requirements