Set Auto Activate To Lpar - Hitachi Compute Blade 2000 User Manual

Set Auto Activate to LPAR

When you set Auto Activate to an LPAR, it will automatically activate once the LPAR
manager initialization is complete.
To set Auto Activate, make the AA (Order Number) setting on the Logical Partition
Configuration screen.
 Setting order number to LPAR AA with Auto Activate
Order Number follows the order of LPARS to activate, prioritizing a smaller number.
If the same number is set to two LPAR AAs, Auto Activate is executed from the smaller
LPAR number.
1 Put the cursor on the target LPAR AA, and press Enter.
2 Set Order Number on The auto activation order subscreen, and press Enter.
+------------------------------------------------------------------------------+
|+- Logical Partition(LPAR) Configuration ------------------------------------+|
|| # Name Sta Pro Shr Ded Srv
|| 1 LPAR1 Dea
|| 2 LPAR2 Dea
|| 3 LPAR3 Dea
|| 4 LPAR4 Dea
|| 5
|| 6
|| 7
|| 8
|| 9
|| 10
||
|+-----------------------| Value is * or Order Number|------------------------+|
|+- Logical Information -+---------------------------+ysical Information -----+|
||
|| Assign Total
|| Act Total
|| Remain
|+----------------------------------------------++----------------------------+|
| Auto Activation Order
+------------------------------------------------------------------------------+
| F2:Mem Alloc Dsp F3:Act F4:Deact F5:React F6:Add F7:Remove
+------------------------------------------------------------------------------+
Mem VN ID AA AC PC VC PB
2 0 2 100 2048 0 Y * N * N BIOS
1 0 1 100 1024 0 Y * N * N BIOS
1 0 1 100 1024 0 Y * N * N BIOS
1 0 1 100 1024 0 Y * N * N BIOS
+---------------------------+
| The auto activation order |
|
| 1
+---------------------------+ / [PageDown]:Page Down ||
Pro Shr Ded Mem VN || User Memory
5 0 5 5120 0 || Processors
0 0 0 0 0 ||
4608 ||
1071
||
||
||
||
||
||
||
||
||
| ||
| ||
: 4608 MB ||
: 8(8) ||
Shared : 0 ||
Dedicate : 0 ||
|
Esc:Menu |