Lpar Manager Setting Change And Affected Area - Hitachi Compute Blade 2000 User Manual

LPAR manager setting change and
affected area
The following table shows LPAR manager items to change settings and areas to be
affected by the change.
LPAR manager
setting change
System information update
LP IP address
Subnet Mask/
Default Gateway
Alert Language
VNIC System No
LP ID
Virtual console port
BSM IP address *3
BSM Alert Port *3
LP CLI IP Address
LPAR manager
Operating Mode
Change in LP option setting
Pre-State Auto
Activation
LP Auto Shutdown
LP Error Watching
Confirmation
Activation
Confirmation
Deactivation
Screen Switching
Character
USB Auto Allocation
to LPAR
Save Changed
Config Format
Save Time Config
PhyCPU C-State (>=
C3)
LP TimerCounter
Base
Change in resource/function assigned to LPAR
LPAR name change
Change in CPU
schedule *1
Change in the
number of CPU
Change in processor
group *2
Affected area
LPAR LPAR LPAR
(Target (Other manager
LPAR) LPAR) (Service)
  
  
  
  
  
  
  
  
- - -
  
- - -
- - -
- - -
- - -
- - -
- - -
- - -
- - -
- - -
-
 
  
 - -
 - -

- -
 - -
1425
LPAR
Remarks
manager
(System)
-
Deactivate all LPARs.
-
Reflecting the change
makes NICs of all LPARs
linkdown, which causes
-
the network
-
communication between
-
servers running on LPARs
-
to stop for several
minutes. SC/BSM shows
-
that the LPAR manager
-
state is Deactivate, for
which no error notification
is performed.
- Deactivating the target
LPAR is not required.
Rebooting the server

blade is required.
- Deactivating target LPARs
is not required.
-
-
-
-
-
-
-
-
- Deactivating all LPARs is
required.
Rebooting the server

blade is required.
- Deactivating target LPARs
is required.
-
-
-