Hitachi Compute Blade 2000 User Manual page 987

 ILC command
You can set the internal network setting. Type ILC at the prompt and press Enter.
5713RF0 NNNNN(0)IOEU> ILC
<< ILC - Internal LAN setting. >>
-- Internal network --
Network address : 192.168.253.
Subnetmask : 255.255.255.
-- Internal network menu --
E. Edit setting.
Q. Quit.
(E,[Q]) :
Select a menu item from the following table to execute it.
Menu
E. Edit setting.
Q. Quit
Items displayed on the screen are described in the table below.
Item
Network address
Subnetmask
If you type E in the ILC command menu and press Enter, the current setting is
displayed. At the prompt, enter an internal network address, and the changed setting
value is displayed. A warning message appears indicating that the I/O module will
restart after the setting change is displayed. A confirmation message appears. Type Y
and press Enter. The internal network setting is saved. Then the I/O module will restart.
To cancel the setting, type N and press Enter, or just press Enter.
(E,[Q]) : E(Enter)
Network address : 192.168.253.
([Unchange]) : 192.168.200.0(Enter)
-- Internal network --
Network address : 192.168.200.
Subnetmask : 255.255.255.
WARNING : If confirm, I/O module restart and this connect is lost.
Confirm? (Y,[N]) :
- <I/O module0> Restarting
(Disconnected.)
(Enter)
0
0
Sets the internal network.
Quits the ILC command.
Network address of internal network
Default value: 192.168.253.0
Subnetmask of internal network
Default value: 255.255.255.0
0
0
0
Y(Enter)
936
Description
Description