Hitachi Compute Blade 2000 User Manual page 1426

The following table shows sequences of devices recognized in SMP configuration.

Each device is recognized by the number shown at the bottom of the table.
Primary
Server blade #0 Server blade #1
1 2 3 4 5 6
With 4-blade SMP configuration, the following performance might be slower than

that with 1 blade or 2-blade SMP.
Performance when more logical processors in shared mode than physical

processors are assigned.
Virtual COM console

Time required for Windows bootup

When the power capping is enabled with 4-blade SMP configuration, OS boot

might take longer. If so, disable the power capping setting. See
the power capping function
later) for details.
Non-Primary
Server blade #2
7 8 9 10 11 12 13 14
(LPAR manager firmware version 58-7X/78-7X or
1375
Server blade #3
15 16 17 18 19 20
(6) How to change