Hitachi Compute Blade 2000 User Manual page 1502

Message content
Explanation The service ratio you tried to set was not in the range from 1 to 999 so
it could not be set.
LPAR manager Aborts the service ratio setting.
operation
What to do Set a service ratio between 1 and 999.
Message content
Explanation Now switching to the LPAR guest screen.
LPAR manager Continues the specified processing.
operation
What to do Wait for a while.
Message content
Explanation The LPAR you tried to deactivate is already deactivated.
LPAR manager Aborts the service ratio setting.
operation
What to do Try again after activating the LPAR.
Message content
Explanation The LPAR you tried to manipulate is not available due to LAPR
migration in execution.
LPAR manager Aborts the specified process.
operation
What to do Retry the specified process after LPAR migration is complete.
Message content
Explanation The LPAR you tried to manipulate is not available due to rollback by
LPAR migration.
LPAR manager Aborts the specified process.
operation
What to do Retry the specified process after LPAR rollback is complete.
Message content
Explanation The LPAR you tried to manipulate is undefined.
When you tried to change the configuration information of a virtual
NIC, you tried to change an undefined LPAR.
LPAR manager Aborts the specified process.
operation
What to do Retry the specified process.
Message content
Explanation An LPAR with the name you set already exists.
LPAR manager Aborts LPAR name change process.
operation
What to do Change the name.
Service Ratio must be 1-999
Target LPAR is coming to foreground.
Target LPAR is deactive.
Target LPAR is Executing Migration.
Target LPAR is Executing Rollback.
Target LPAR is undefined.
The name is used for other LPAR.
1451