Hitachi Compute Blade 2000 User Manual page 999

Hostname
Port number
User name
Access type
Authentication type
Authentication password : *****
Encryption type
Encryption password
Confirm? (Y,[N]) : Y (Enter)
- Writing setting was completed.
Hit enter key. (Enter)
Be sure to configure a user name. If not configured, "([Unchange]) is not displayed.
The screen for authentication type is displayed when an access type other than
noAuthnoPriv is selected.
Be sure to configure an authentication password. If not configured, "([Unchange]) is not
displayed. When a password is configured, 5 asterisks "*****" are displayed.
The screen for encryption type is displayed when AuthPriv as an access type is
selected.
Be sure to configure an encryption password. If not configured, "([Unchange]) is not
displayed. When a password is configured, 5 asterisks "*****" are displayed.
If you type DA in the SNM command menu and press Enter, you can delete SNMP
agent settings. Type Y and press Enter, and the SNMP agent is deleted. To cancel the
deletion, type N and press Enter, or just press Enter.
(A,M,DA,DM,T,C,[Q]) : DA
-- SNMP agent setting --
Agent : Disable
Contact name :
Location :
Port number : 161
Trap level : All
SNMP version : v1/v2c
Engine ID string : ---
Engine ID : ---
Confirm? (Y,[N]) : Y (Enter)
- Writing setting was completed.
Hit enter key. (Enter)
: 192.168.0.22
: 162
: UserName
: AuthPriv
: SHA
: AES
: *****
(Enter)
948