Hitachi Compute Blade 2000 User Manual page 1014

 LDAP command
You can display and configure I/O module directory service connection. Enter LDAP at
the prompt and press Enter.
5713RF0 NNNNN(0)IOEU> LDAP
<< LDAP - Directory service setting. >>
-- Directory service setting menu --
D. Show directory service setting.
C. Edit connection setting.
S. Edit directory search setting.
A. Edit group authentication setting.
R. Reset directory service setting.
Q. Quit.
(D,C,S,A,R,[Q]) :
Select a menu item from the following list to execute it.
Menu
D. Show directory service
setting.
C. Edit connection setting.
S. Edit directory search
setting.
A. Edit group authentication
setting.
R. Reset directory service
setting.
Q. Quit
If you type D in the LDAP command menu and press Enter, the current directory
service settings are displayed.
(D,C,S,A,R,[Q]) : D
-- connection setting --
LDAP : Enable
LDAP server 0 : 192.168.1.100
LDAP server 1 : 192.168.1.200
LDAP server 2 :
Port number : 636
Bind DN : bind
-- directory search setting --
Base DN
Login ID attribute : loginid_attribute
Role attribute
-- group authentication setting --
Group member attribute : member_attribute
Group DN 0
Group DN 1
(Enter)
-
Configures required settings for Lightweight Directory
Access Protocol (LDAP) server connection.
-
^
Initializes directory service settings.
Quits the LDAP command.
(Enter)
: testname
: role_attribute
: GDN0
: GDN1
963
Description