Hitachi Compute Blade 2000 User Manual page 1312

# Title Official Name
(11) Clear NVRAM NVRAM
initialization
(12) - NVRAM
initialization
LPAR
(13) Copy NVRAM Copy NVRAM
(14) - LPAR from
which the
NVRAM is
copied
(15) - LPAR to which
the NVRAM is
copied
(16) Take LP Dump Take LPAR
manager dump
Description
Initializes the NVRAM of the LPAR specified by (12).
This operation cannot be performed if "Select" is
displayed in (12). (The cursor cannot move over
this column.)
Behavior when Clear
Item
NVRAM performed
EFI driver
Not initialized
settings
Boot order Initialized
Displays the LPAR on which the NVRAM is to be
initialized.
You can specify only a deactivated LPAR.
"Select" will be displayed if no LPARs have been
defined, or if LPARs had been defined, but all
LPARs have been activated.
If the specified LPAR has been activated, this
column will automatically change to a LPAR that
has been deactivated.
Copies the contents of the NVRAM of the LPAR
specified by (14) to the LPAR specified by (15).
This operation cannot be performed if "Select" is
displayed in (14) or (15). (The cursor cannot move
over this column.)
Behavior when Copy
Item
NVRAM performed
EFI driver
Not copied
settings
Boot order copied
Displays the LPAR from which the NVRAM will be
copied.
"Select" will be displayed if no LPARs have been
defined.
Displays the LPAR to which the NVRAM will be
copied.
You can specify only a deactivated LPAR.
"Select" will be displayed if no LPARs have been
defined, or if LPARs had been defined, but all
LPARs have been activated.
If the specified LPAR has been activated, this
column will automatically change to a LPAR that
has been deactivated.
Collects the LPAR manager dump.
The LPAR manager dump collected with this
operation is used to analyze failures when they
occur.
In normal operation, there is no need to collect the
LPAR manager dump. If a problem appears in the
equipment, it might become necessary to collect
the LPAR manager dump.
1261
Initial
Value
-
-
-
-
-
Execut
e