For Serverconductor/Blade Server Manager - Hitachi Compute Blade 2000 User Manual

Setting management server information for
ServerConductor/Blade Server Manager
Management server information needs to be set when using ServerConductor/Blade Server
Manager (BSM). This refers to the information reported to BSM when the management
module detects a fault or other event.
 Destination BSM setting
(1) On the main menu, enter S and press Enter.
At the prompt SVP, type BSM and press Enter. The following window appears.
chassis≠1(1)SVP>BSM
<< BSM – SC/BSM setting. >>
-- Manager setting --
No. Name
--- ------------- ---------------- -----------
0 -----------
1 -----------
2 -----------
3 -----------
M. Edit manager setting
D. Delete manager setting.
DB. Show/Edit basis detail setting.
DM. Show/Edit manager detail setting.
T. Test N+M cold standby.
Q. Quit.
(M, D, DB, DM, T, [Q]): M
M. Edit manager setting.
D. Delete manager setting.
DB. Show/Edit basis detail setting.
DM. Show/Edit manager detail setting.
T. Test N+M cold standby.
Q. Quit
(2) If you select M. Edit manager setting., the following window appears.
Enter the host name, IP address and SVP alert level as indicated in the window.
IP address Alert level
-------------- ---------
-------------- ---------
-------------- ---------
-------------- ---------
Menu
1511
Description
Edit BSM information.
Delete BSM information.
View or edit basic information.
View or edit detailed BSM information.
Test N+M cold standby.
Quit the BSM setup menu.