Hitachi Compute Blade 2000 User Manual page 836

ID Level
Meaning: The module indicated by %s1 was installed.
Action: No particular action is required.
1791 Info Module <%s1> was removed.
Meaning: The module indicated by %s1 was removed.
Action: No particular action is required.
1792 Info Module <%s1> restored redundancy.
Meaning: The module indicated %s1 is operating in a redundant configuration.
Action: No particular action is required.
1793 WARNING Module <%s1> lacks redundancy.
Meaning: The module indicated %s1 is no longer operating in a redundant configuration.
Action: The module can continue operating, but lacks redundancy. Contact your sales or
service representative.
1794 FAIL Module <%s1> an insufficient quantity of this module is installed.
Meaning: There are too few of the modules indicated by %s1 in the system. The system will
shut down if there are no longer enough power supply modules or fan modules in operation.
Action: Make sure that the modules indicated by %s1 are installed correctly, and then contact
your sales or service representative.
1799 FAIL A system configuration error was found.
Meaning: There is a problem with the system configuration.
Action: If you changed an aspect of the system configuration before the message was
output, check whether there is a problem with the change you made. If there is nothing
wrong with the configuration, contact your sales or service representative.
179A WARNING A warning about the system configuration was detected.
Meaning: There is a problem with the system configuration.
Action: If you changed an aspect of the system configuration before the message was
output, check whether there is a problem with the change you made. If there is nothing
wrong with the configuration, contact your sales or service representative.
17A0 WARNING LAN port <%s1> lacks redundancy.
Meaning: The LAN port indicated by %s1 is no longer operating in a redundant configuration.
Action: Check the connection to the specified LAN port. The network status may cause the
LAN port to temporarily lose redundancy. If this message is followed by the recovery
message 17A1, the problem is resolved.
17A1 Info LAN port <%s1> redundancy was restored.
Meaning: The LAN port indicated by %s1 is again operating in a redundant configuration.
Action: No particular action is required.
17A2 Info LAN port <%s1> has switched to another port.
Meaning: When redundancy is enabled for the LAN port indicated by %s1, this message
indicates that data will now be routed through an alternate path.
Action: If this message appears on its own, then the LAN port is working with the redundancy
intact and no action is required. If the message 17A0 is also output, check the connection
status of the specified LAN port.
17A3 Info LAN port <%s1> has recovered from an error.
Meaning: The alternate routing implemented with message 17A2 has returned to its former
state.
Action: No particular action is required.
17A8 WARNING Sending out an e-mail report message failed. It will be retried.
Message
Description
785