Hitachi Compute Blade 2000 User Manual page 600

-- Partition network setting --
P IP address Subnetmask
- --------------- --------------- --------------- --------
0 192.168. 1. 1 255.255.254. 0
1 192.168. 1. 2 255.255.254. 0
2 192.168. 1. 3 255.255.254. 0
3 192.168. 1. 4 255.255.254. 0
4 192.168. 1. 5 255.255.254. 0
5 192.168. 1. 6 255.255.254. 0
6 192.168. 1. 7 255.255.254. 0
7 192.168. 1. 8 255.255.254. 0
WARNING : Session may be disconnected when setting saved.
Confirm? (Y,[N]) : Y (Enter)
- <Partition0> Writing setting was completed.
- <Partition1> Writing setting was completed.
- <Partition2> Writing setting was completed.
- <Partition3> Writing setting was completed.
- <Partition4> Writing setting was completed.
- <Partition5> Writing setting was completed.
- <Partition6> Writing setting was completed.
- <Partition7> Writing setting was completed.
Hit enter key. (Enter)
If you enter N in the partition setting menu and press Enter, you are asked to select a
partition. Enter the IP address of the specified partition, and the current subnetmask of
the specified partition is displayed. Enter the default gateway of the specified partition,
and the changed setting value is displayed. A warning message indicating that the
connection to the specified partition may be disconnected is displayed after the
changed setting is saved. A confirmation message is displayed. At the prompt, enter Y
and press Enter to save the network setting. The session connected by specifying the
former IP address is disconnected. To cancel the setting change, enter N and press
Enter, or just press Enter.
Default gateway Ext port
0. 0. 0. 0 MGMT-0
0. 0. 0. 0 MGMT-0
0. 0. 0. 0 MGMT-0
0. 0. 0. 0 MGMT-0
0. 0. 0. 0 MGMT-0
0. 0. 0. 0 MGMT-0
0. 0. 0. 0 MGMT-0
0. 0. 0. 0 MGMT-0
549