Hitachi Compute Blade 2000 User Manual page 1210

(1) How to Return to the LPAR manager Menu from Each LPAR manager screen
Press Esc on each LPAR manager screen. If there are no settable items on the
displayed screen, the cursor is always positioned on the Esc:Menu display.
Pressing Enter in this status returns to the LPAR manager Menu screen.
(2) How to Activate (turn on) an LPAR
Press F3: Act in this screen to display a subscreen, place the cursor on an LPAR to
activate on the subscreen, and press Enter. You can perform "Activate" only to
deactivated LPARs.
(3) How to Deactivate (Turn off) an LPAR
Press F4: Deact in this screen to display a subscreen, place the cursor on an
LPAR to deactivate on the subscreen, and press Enter. You can perform
"Deactivate" only to activated LPARs.
Always perform "Deactivate" carefully because it is equivalent to turning off an
LPAR. It can damage the disk on which "Deactivate" is performed especially during
data access such as guest OS boot. Thus, we recommend shutting down the OS
instead of deactivating.
When shutting down the guest OS in operation on an

LPAR, the guest OS might hang up in the final process.
If the guest OS hangs up, deactivate the LPAR. The
disk will not be damaged because the LPAR has been
disconnected from the disk.
(4) How to Reactivate an LPAR
Press F5: React in this screen to display a subscreen, place the cursor on an
LPAR to reactivate on the subscreen, and press Enter. You can perform
"Reactivate" only to activated LPARs.
Always perform "Reactivate" carefully because it is equivalent to rebooting the
server blade. It can damage the disk on which "Reactivate" is performed especially
during data access such as guest OS boot. We recommend that you reboot the OS
instead of reactivating.
When rebooting the guest OS in operation on an LPAR,

the guest OS might hang up in the final process. If the
guest OS hangs up, reactivate the LPAR. The disk will
not be damaged because the LPAR has been
disconnected from the disk.
(5) How to Add an LPAR
Press F6: Add in this screen to display a subscreen, place the cursor on an LPAR
to add on the subscreen, and press Enter.
(6) How to Delete an LPAR
Press F7: Remove in this screen to display a subscreen, place the cursor on an
LPAR to delete on the subscreen, and press Enter. You can delete only a
deactivated LPAR. When an LPAR is deleted, all resources assigned to the LPAR
will be unassigned
(7) How to Migrate from the LPAR manager screen to an LPAR screen
1159