Hitachi Compute Blade 2000 User Manual page 1322

When configuration has been completely saved, reboot is executed.
+------------------------------------------------------------------------------+
|+- Options ------------------------------------------------------------------+|
|+- System Control ---------------------+- LP Dump Operation -----------------+|
|| Pre-State Auto Activation
|| LP Auto Shutdown
|| Shutdown State
|| LP ErrorWatching
|| PhyCPU C-State (>= C3)
|| USB Auto Allocation to LPAR
|| Save Changed Config Format
|| LP TimerCounter Base
|+------------------+--------------------------------------+------------------+|
|| | LP System Restarted. Please Wait... |------------------+|
|| +--------------------------------------+ LPAR1
||
||
||
||
||
||
|+----------------------------------------------------------------------------+|
|
+------------------------------------------------------------------------------+
|
+------------------------------------------------------------------------------+
(14) How to change the setting for Save Time Config
LPAR manager firmware version 59-41/79-41 or later
(a) Using NTP
Check LPAR manager system time on the Date and Time screen. If the

LPAR manager system time is not synchronized, adjust the LPAR manager
system time by restoring the NTP server network state.
Adjust deactivated LPAR time using Adjust LPAR Time for LPAR System

Time, Specified Zone, and UTC, on the Date and Time screen. Check the
guest OS timezone, and perform Adjust LPAR Time with the same timezone
as the guest OS. For activated LPARs, adjust the time by using the guest OS
or NTP time synchronization for the guest OS.
|+- System Date and Time -----------------------------------------------------+|
|| Date and Time yyyy/mm/dd hh:mm:ss Time Zone + 9:00
|+-Setting--------------------------------------------------------------------+|
|| Import Config None
|| TimeSync SVP
|+----------------------------------------------------------------------------+|
Enable the Save Time Config on the Options screen.

|| USB Auto Allocation+---------------------------------+---------------------+|
|| Save Changed Config| Save Time Configuration Setting |ng Character --------+|
|| HVM TimerCounter Ba|
|| Save Time Config |
|+--------------------|
|| +---------------------------------+
|| |
|| +---------------------------------+---------------------+|
No | Take LP Dump
No +-------------------------------------+|
Ready +- Confirmation ----------------------+|
Yes | Activation
Enable | Deactivation and Reactivation
Enable +-------------------------------------+|
Disable +- Screen Switching Character --------+|
CpuFreq | LPAR --> LP
| Copy NVRAM From LPAR1 To
+-------------------------------------+|
Adjust LPAR Time ||
|
Enable |---------------------+|
Disable |n -------------------+|
LPAR1
| LPAR1 To
1271
Execute ||
Yes ||
Yes ||
[Ctl]+ l ||
||
LPAR2||
||
||
||
||
|
Esc:Menu |
||
||
[Ctl]+ l ||
||
LPAR1||