Hitachi Compute Blade 2000 User Manual page 998

Confirm? (Y,[N]) : Y (Enter)
- Writing setting was completed.
Hit enter key. (Enter)
Be sure to configure a community name. If not configured, "([Unchange]) is not
displayed.
With SNMP version v3:
Menu
1
2
3
4
5
6
7
8
When you type an encryption password, the changed setting value is displayed. A
confirmation message appears. Type Y and press Enter, and the SNMP manager
connection setting is applied. To cancel the setting, type N and press Enter, or just
press Enter.
(A,M,DA,DM,T,C,[Q]) : M
Select manager (0-3,[Q=Quit]) : 0
SNMP version : v1/v2c
(0=v1/v2c,1=v3,[Unchange]) : 1
Hostname : 0.0.0.0
([Unchange]) : 192.168.0.22
Port number : 162
(1-65535,[Unchange]) :
User name : xxxxxx
([Unchange]) : UserName :
Access type : noAuthnoPriv
(0=noAuthnoPriv,1=AuthnoPriv,2=AuthPriv,[Unchange]) : 2
Authentication type : MD5
(0=MD5,1=SHA,[Unchange]) : 1
Authentication password : *****
([Unchange]) :
Encryption type : DES
(0=DES,1=AES,[Unchange]) : 1
Encryption password : *****
([Unchange]) :
-- SNMP manager setting --
<Manager0>
SNMP version
Address for SNMP manager
Port number for SNMP manager
User name
Access type
Authentication type when a type of access other than
noAuthnoPriv is selected.
Authentication password when a type of access other than
noAuthnoPriv is selected.
Encryption type when a type of access AuthPriv is
selected.
Encryption password when a type of access AuthPriv is
selected.
(Enter)
(Enter)
(Enter)
(Enter)
(Enter)
(Enter)
(Enter)
(Enter)
(Enter)
(Enter)
: v3
947
Description
(Enter)