Hitachi Compute Blade 2000 User Manual page 1043

ID Level
1847 WARNING On module <%s1>, an access error to <%s2> occurred.
Meaning: A communication error, shown in %s2 of the module shown in %s1, occurs. Action:
When the message ID: 1848 is registered after this message to show the recovery due to the
temporary error, nothing is required. If the message is not registered, consult your reseller or
maintenance personnel.
1890 Info Module <%s1> was installed.
Meaning: A module shown in %s is inserted.
Action: Nothing is required.
1891 Info Module <%s1> was removed.
Meaning: A module shown in %s is removed.
Action: Nothing is required.
1892 Info Module <%s1> restored redundancy.
Meaning: A module shown in %s has redundancy.
Action: Nothing is required.
1893 WARNING Module <%s1> lacks redundancy.
Meaning: A module shown in %s has no longer redundancy.
Action: Although the device can keep working, redundancy is lost. Consult your reseller or
maintenance personnel.
1894 FAIL The total number of modules <%s1> is insufficient.
Meaning: The number of modules shown in %s is not enough. If the number of power supply
modules or fan module is not insufficient, the system halts.
Action: Check if the module shown in %s is properly inserted. If they are properly inserted,
consult your reseller or maintenance personnel.
1899 FAIL A system configuration error was found.
Meaning: A system configuration is improper.
Action: If you changed the configuration before the message appeared, check if something is
wrong in the configuration. If not, consult your reseller or maintenance personnel.
18A0 WARNING LAN port <%s1> lacks redundancy.
Meaning: The LAN port shown in %s1 has no longer redundancy.
Action: Check if the LAN port is properly connected. Redundancy for LAN ports can be
temporarily lost, but no problem when the message ID: 18A1 is registered after this message.
18A1 Info LAN port <%s1> redundancy was restored.
Meaning: Redundancy for the LAN port shown in %s is restored.
Action: This shows just information. Nothing required.
18A2 Info LAN port <%s1> has switched to another port.
Meaning: The LAN port shown in %s has switched to another port when redundancy for the
LAN port is enabled.
Action: This message shows redundancy secured, but if the message ID: 18A0 appears with
this message, check the LAN port connection.
18A3 Info LAN port <%s1> has recovered from an error.
Meaning: The switched LAN port as shown in the message ID: 18A2 has switched back to the
former state.
Action: This shows just information. Nothing required.
18A8 WARNING Sending out an e-mail report message failed. It will be retried.
Meaning: E-mail notification failed to be sent and will be retried.
Action: Check if communication between the mail server and I/O slot expansion unit is
available, and e-mail notification settings. If any problem in the settings, correct them.
18A9 WARNING Sending out an e-mail report message failed.
Message
Description
992