Hitachi Compute Blade 2000 User Manual page 1273

# Title Official Name
(14) Error Event Error event
Detected detection
# Title
Activated Deactivated
(1) LP ID - (*1)
(2) LP IP Address - (*1)
(3) Subnet Mask - (*1)
(4) Default
- (*1)
Gateway
(5) BSM 1 - 4 IP Standard server blades with LPAR manager firmware 58-3X or earlier
Address (*1) versions/ High-performance with LPAR manager firmware 78-3X or earlier
versions
- (*1)
Standard server blades with LPAR manager firmware 58-4X or later
versions/ High-performance with LPAR manager firmware 78-4X or later
versions
(6) BSM 1 - 4 Standard server blades with LPAR manager firmware 58-3X or earlier
Alert Port (*1) versions/ High-performance with LPAR manager firmware 78-3X or earlier
versions
- (*1)
Standard server blades with LPAR manager firmware 58-4X or later
versions/ High-performance with LPAR manager firmware 78-4X or later
versions
(7) Management
- (*1)
Path
(8) VNIC System
- (*1)
No
(9) Alert Language - (*1)
(10) Virtual Console
- (*1)
Port
(11) LPAR manager Standard server blade: LPAR manager firmware 58-71 or later versions
Operating
High-performance server blade: LPAR manager firmware 78-71 or later
Mode
versions
(12) LP CLI1-8 IP Standard server blade: LPAR manager firmware 58-6X or later versions]
Address
High-performance server blade: LPAR manager firmware 78-6X or later
versions
: can be changed. -: cannot be changed.
(*1) Operation with F10 (Update System Config) should be done with no activated
LPAR. If it is performed with an activated LPAR, network communication
Description
Displays that LP system logs at the error level are
detected.
When this is displayed, check the LP system log
in the LP System Logs screen.
See LP system logs for checking LP system logs.
To delete this display, press the Esc key on this
screen or open the system logs screen.
Guest status
Failure
-

 
 
 
 
  
 
  
- -
-



-

- -

  
1222
Initial Value
Remarks
Display only