Hitachi Compute Blade 2000 User Manual page 636

After the input, the new setting value is displayed. When the retry notification is
scheduled, a message appears to show that the notification will be processed with the
latest setting. A confirmation message appears. At the prompt, enter Y and press
Enter, and the e-mail notification setting is saved. To cancel the setting, enter N and
press Enter, or just press Enter.
(E,R,[Q]) : E (Enter)
Notification : Enable
(0=Disable,1=Enable,[Unchange]) : 1 (Enter)
Address :
([Unchange]) : dish@hitachi.com (Enter)
Host (FQDN) :
([Unchange]) : bs2kfw.com (Enter)
Comment :
([Unchange]) : test (Enter)
SMTP server :
([Unchange]) : 192.168.0.76 (Enter)
Authentication : Disable
(0=Disable,1=Enable,[Unchange]) : 1 (Enter)
Name :
([Unchange]) : admin (Enter)
Password : *****
([Unchange]) :
Method : PLAIN
(0=PLAIN,1=LOGIN,2=CRAM-MD5,[Unchange]) : 2 (Enter)
Encryption : Disable
(0=Disable,1=Enable,[Unchange]) : 1 (Enter)
Protocol : SSL
(0=SSL,1=TLS,[Unchange]) : 1 (Enter)
Set port number to 587? (Y,[N]) : N (Enter)
Port number :
(1-65535,[Unchange]) : 25 (Enter)
-- E-mail notification setting --
Notification : Enable
Address : dish@hitachi.com
Host (FQDN) : bs2kfw.com
Comment : test
SMTP server : 192.168.0.76
Port number : 25
-- E-mail authentication setting --
Authentication : Enable
Name : admin
Method : CRAM-MD5
-- E-mail encryption setting --
Encryption : Enable
Protocol : TLS
WARNING : If e-mail notification is scheduled to retry, the latest
setting will be in effect.
Confirm? (Y,[N]) : Y (Enter)
- Writing setting was completed.
Hit enter key. (Enter)
585