Hitachi Compute Blade 2000 User Manual page 1261

The following table describes key operations on the screen for the list of VLAN ID
assignment and Promiscuous Mode setting.
# Key
(1) Esc Closes the screen for the list of VLAN ID assignment
and promiscuous mode settings.
(2) PageUp Displays the previous entry. If no previous entry,
nothing happens by pressing this button.
(3) PageDown Displays the next entry. If no previous entry, nothing
happens by pressing this button.
(4) Other than Nothing happens: ignored.
keys above
(7) How to change the inter-LPAR packet filtering (for LPAR manager firmware 57-30
or later versions)
When VF NIC is assigned, you can select only Disable.
Display the Virtual NIC Assignment screen.
Place the cursor at an item where an LPAR line crosses a VNIC number column,
and press F8: Packet Filter to display the subscreen. Select an inter-LPAR packet
filtering to change, and press Enter.
Inter-LPAR packets
Inter-LPAR
Inside LPAR
packet filtering
manager
Disable Transferred
Not
Enable
transferred
Description
Packets to
Outside
outside LPAR
LPAR
manager
manager
Enables inter-LPAR
communication in the
same segment.
Not
Transferred
transferred
Used for inter-LPAR
communication only
inside LPAR manager.
Disables inter-LPAR
communication in the
same segment.
Used for improving
Transferred Transferred
independence and
security of LPARs when
each LPAR has a
respective owner.
1210
Use