Hitachi Compute Blade 2000 User Manual page 1320

If there are two LP system log entries indicating "LPAR manager dump transfer
succeeded", see "DL Commands" in Chapter 6 and create a failure analysis log
file following the instructions in "D. Dump log to file". Then export that log file to
an external medium, and contact the reseller from which you purchased the
equipment or maintenance personnel.
The "LPAR manager dump transfer succeeded" LP system log entry is
normally obtained approximately 10 to 20 seconds after the LPAR manager
dump collection operation is performed. If you do not get this log entry, press
the Esc key to display the LPAR manager Menu screen and then redisplay the
LP System Logs screen. That is because the LP System Logs screen does not
automatically update. If you do not get the two "LPAR manager dump transfer
succeeded" LP system log entries after 10 minutes or more, or if you get the
"LPAR manager dump transfer failed" log entry, another failure might have
occurred. Contact maintenance personnel.
Repeat this operation to obtain multiple LPAR manager dumps.
(13) How to change a value to be based for timer counter calculation
LPAR manager firmware version 59-2X/79-2X or later
You need to deactivate all LPARs for changing a value to be based for timer counter
calculation.
Place the cursor on LP TimerCounter Base and press Enter.
+------------------------------------------------------------------------------+
|+- Options ------------------------------------------------------------------+|
|+- System Control ---------------------+- LP Dump Operation -----------------+|
|| Pre-State Auto Activation
|| LP Auto Shutdown
|| Shutdown State
|| LP ErrorWatching
|| PhyCPU C-State (>= C3)
|| USB Auto Allocation to LPAR
|| Save Changed Config Format
|| LP TimerCounter Base
|+--------------------------------------+-------------------------------------+|
||
||
||
||
||
||
||
||
|+----------------------------------------------------------------------------+|
|
+------------------------------------------------------------------------------+
|
+------------------------------------------------------------------------------+
No | Take LP Dump
No +-------------------------------------+|
Ready +- Confirmation ----------------------+|
Yes | Activation
Enable | Deactivation and Reactivation
Enable +-------------------------------------+|
Disable +- Screen Switching Character --------+|
TSC | LPAR --> LP
+- NVRAM Operation -------------------+|
| Clear NVRAM LPAR1
| Copy NVRAM From LPAR1 To
+-------------------------------------+|
1269
Execute ||
Yes ||
Yes ||
[Ctl]+ l ||
||
LPAR2||
||
||
||
||
|
Esc:Menu |