Hitachi Compute Blade 2000 User Manual page 701

If you enter V at the UBR command menu and press Enter, the menu for backing up
and restoring LPAR manager configuration information is displayed.
(M,B,E,F,V,H,D,[Q]) : V(Enter)
-- LP menu --
B. Backup.
R. Restore.
Q. Quit.
(B,R,[Q]) :
Select a menu item from the following table to execute the function.
Menu
B. Backup.
R. Restore.
Q. Quit
If you enter B at the LP menu and press Enter, you are prompted to select a partition.
When you enter the partition number and press Enter, you are prompted to enter a file
name. When you enter the file name, a confirmation message appears. To create the
file storing the configuration information, enter Y at the confirmation prompt and press
Enter. To cancel the operation, enter N at the confirmation prompt and press Enter, or
simply press Enter.
(B,R,[Q]) : B (Enter)
Select partition (0-7,[Q=Quit]) : 0
Input backup file name ([Q=Quit]) : conf
Confirm? (Y,[N]) : Y (Enter)
- <Partition0> Creating backup file was completed.
- Backup file name is hvm-conf.backup.
Hit enter key. (Enter)
When the file finishes storing the configuration information, the file name is displayed
and the prompt is ready. Press Enter, and the screen returns to the management
module configuration menu. That file is stored in the user directory in the
management module. You can take out the file via FTP or SFTP. The account name
and password for connection via FTP or SFTP are the same as when you log in to the
system console.
Description
Backs up LPAR manager configuration information.
Restores LPAR manager configuration information.
Returns to the previous menu.
(Enter)
(Enter)
650