Management Interface Security - Hitachi Compute Blade 2000 User Manual

Hide thumbs Also See for Compute Blade 2000:

Table of Contents

Management Interface Security

This subsection describes the security of LPAR manager management interfaces.

 Security strength

You can strengthen the LPAR manager security in the LPAR manager management

interface. Security strength has two setting values, "Default" and "High". "Default" is the

default value at the factory.

Changing the value: "Default" to "High" to strengthen the security of LPAR manager

management interface, which includes the following.

Communication in plaintext is not allowed.

In encrypted communication, only high security algorithm can be used.

 Security strength and LPAR manager management interfaces

For LPAR manager, you can change security strength of management interfaces shown in

the following table. When the security strength is changed, LPAR manager interfaces will

use the following protocol and encryption methods shown in the table below. See

Encryption algorithm supported by LPAR manager

(-): Communication is not available.

When using HVM Navigator, set the security strength of

HvmSh and HCSM to "Default".

for the setting.

Set in Default

Table of Contents