Hitachi Compute Blade 2000 User Manual page 942

NTP server information is described in the table below.
Item Description of item
No. NTP server number
Hostname NTP server address
Status Connection status to
NTP server
With the following conditions, time synchronization is not
available:
NTP server address is specified as the domain name.

The I/O module with time synchronization by NTP

enabled cannot be connected to the domain name
system (DNS) server.
 SDN command
You can shutdown the system. Type SDN at the prompt, and press Enter.
5713RF0 NNNNN(0)IOEU> SDN
<< SDN - System shutdown. >>
-- Shutdown menu --
S. Shutdown system.
Q. Quit.
(S,[Q]) :
Select a menu item from the following list to execute it.
Menu
S. Shutdown system.
Q. Quit
Value
NTP0 Up to 4 NTP servers can be
to NTP3 registered.
Domain FQDN for NTP servers: displays up
name to 127 characters as ASCII code.
IP address IP address for NTP servers
------- No NTP server is set.
Not Connection is unavailable.
connect
Connect Connection is available but the NTP
server is not synchronized: a server
with higher priority exists.
Sync Connection is available and the NTP
server is synchronized.
Unknown Connection status is unknown.
------- No NTP server is set.
(Enter)
Description
Shuts down the I/O slot expansion unit.
Quits the SDN command.
891
Description of value