Hitachi Compute Blade 2000 User Manual page 1310

Standard server blade with LPAR manager firmware version 59-0X or later
High-performance server blade with LPAR manager firmware version 79-0X or later
+--------------------------------------------------(19) Error Event Detected ------+
|+- Options ----------------------------------------------------------------------+|
|+- System Control ---------------------+- LP Dump Operation ---------------------+|
|(1)Pre-State Auto Activation
|(2)LP Auto Shutdown
|(3)Shutdown State
|(4)LP ErrorWatching
|(6)USB Auto Allocation to LPAR Enable (9)Deactivation and Reactivation
|(7)Save Changed Config Format Disable +- Screen Switching Character ------------+|
|(17)LP TimerCounter Base
(18)Save Time Config
||
||
||
||
||
||
||
||
|+--------------------------------------------------------------------------------+|
|
+----------------------------------------------------------------------------------+
|
+----------------------------------------------------------------------------------+
The following table describes each item on this screen.
# Title Official Name
(1) Pre-State Auto Pre-State Auto
Activation Activation
(2) LP Auto LP Auto
Shutdown Shutdown
No (16)Take LP Dump
No +-----------------------------------------+|
Ready +- Confirmation --------------------------+|
Yes (8)Activation
TSC (10)LPAR --> LP
Disable +-----------------------------------------+|
+- NVRAM Operation -----------------------+|
(11)Clear NVRAM (12)LPAR4
(13)Copy NVRAM From (14)LPAR1 To (15)LPAR4||
+-----------------------------------------+|
Description
Specifies whether or not to return the LPARs to
their status before rebooting when LPAR manager
is rebooted without shutting down the LPAR
manager system.
Yes: Restores the LPAR to the status it had before
the LPAR manager system reboots.
No: Does not restore the LPAR to the status it had
before the LPAR manager system reboots.
Specifies whether or not to shut down the LPAR
manager system if all LPARs have become
deactivated.
Yes: Shuts down the LPAR manager system.
No: Does not shut down the LPAR manager
system.
When turning off the system power with UPS, set
LP AutoShutdown to "Yes".
When LPAR migration is performed, LP Auto
Shutdown is disabled, the same as when the
value is "No".
1259
Execute ||
Yes ||
Yes ||
[Ctl]+ l ||
||
||
||
||
||
|
Esc:Menu |
Initial
Value
No
No