Hitachi Compute Blade 2000 User Manual page 1405

Output item
LPAR operation Indicates the number of LPARs defined and the settings and
information operating status for each defined LPAR.
The LPAR Count line at the top displays the number of
LPARs defined.
As definition information for each LPAR, the LPAR number,
number of shared CPUs (Shr), number of dedicated CPUs
(Ded) and LPAR name (ID) are output.
As operation information for each LPAR, the same
information as that shown in the LPAR Usage screen is
displayed for SrvRatio, Srv(%), Dsp(ms), Busy(%), Dsp(%)
and PC.
Logical processor information defined for each LPAR is
output. It includes the logical CPU number, whether it is
dedicated or shared (Shr or the number of a dedicated
physical processor), LPAR manager execution time (Hyper),
running wait time (Ready) and LPAR execution time (Used).
If the -lpar option specifies LPAR, the command outputs
information only for the specified LPAR. If the -lpar option is
omitted, the command outputs information for all LPARs
defined. For inactive LPARs, the corresponding information
field shows "---" and does not show information for each
logical CPU.
The summary format output shows information equivalent to that shown in the LPAR
Usage screen. For details of data, see description in
Description
LPAR usage.
1354
Type option
all
lpar