Hitachi Compute Blade 2000 User Manual page 1010

If you type M in the MI command menu and press Enter, the manual e-mail notification
menu is displayed.
(C,E,A,M,[Q]) : M (Enter)
-- Manual e-mail notification menu --
N. Send latest log data.
H. Select from notification history.
Q. Quit.
(N,H,[Q]) :
Select a menu item from the following list to execute it.
Menu
N. Send latest log data.
Select from notification
H.
history.
Q. Quit
If you type N in the manual e-mail notification menu and press Enter, the address list
including addresses currently registered is displayed. When you specify an address, a
message indicating that it takes a few minutes to put out the log to the file is displayed.
A message appears to confirm the e-mail transmission. At the prompt, type Y and
press Enter, and the log is output to the file; the e-mail will be sent to the selected
address. To cancel the e-mail transmission, type N and press Enter, or just press
Enter.
(N,H,[Q]) : N (Enter)
-- E-mail address --
<Address0>
Nickname : USER0
Address : user0@mail.hitachi.com
Attach : Yes
<Address1>
Nickname : -----------
Address : -----------
Attach : No
<Address2>
Nickname : -----------
Address : -----------
Attach : No
<Address3>
Nickname : -----------
Address : -----------
Attach : No
Select address (0-3,A=All,[Q=Quit]) : A
WARNING : If confirm, it will take few minutes to dump log to file.
Confirm? (Y,[N]) : Y (Enter)
- <Address0> Sending e-mail notification was completed.
Hit enter key. (Enter)
Description
Collects the current log data and sends them via e-mail.
Selects a log from the notification history and send e-mail
notification.
Returns to the previous menu.
(Enter)
959