Hitachi Compute Blade 2000 User Manual page 1368

Hide thumbs Also See for Compute Blade 2000:

Table of Contents

The following figure shows an image of FC Port assigned to multiple LPARs.

Shared FC driver

Shared physical

(supporting NPIV)

LUa for LPAR1

 FC Adapter Sequences Recognized by LPAR manager

This section describes connections between FC adapter switch modules and ports, and

sequences recognized by LPAR manager.

The following table takes server blade 3 with FC adapters as an example. For server blade

1, replace each slot number, such as replacing PCI Slot6 with PCI Slot2 and PCI Slot7

with PCI slot3. For other server blades, do it the same way.

*1 Since PCI slot sequence is recognized in reverse order, PCI slot numbers are shown in

reverse order on screens such as PCI Device Information and Shared FC Assignment.

OS (Windows)

Shared FC driver

LUb for LPAR2

Switch module port for connection

FC switch module port0 in I/O board module slot6

FC switch module port1 in I/O board module slot6

FC switch module port0 in I/O board module slot7

FC switch module port1 in I/O board module slot7

FC switch module port in switch module slot2

FC switch module port in switch module slot3

FC switch module port in switch module slot4

FC switch module port in switch module slot5

LPAR manager

recognized by

Chapters

Table of Contents