If you type [M] in the BSM command menu and press Enter, you are asked to select a
SC/BSM connection setting. At the prompt, enter a SC/BSM connection setting number.
The current setting is displayed in the numerical order as shown in the table below, or
the recommended value is displayed. To proceed to the next setting, press Enter, or
enter a setting value and press Enter.
Menu
1
2
3
If you enter an alert level, the changed setting value is displayed. A confirmation
message appears. At the prompt, type Y and press Enter. The edited SC/BSM
connection setting is applied. To cancel the setting, type N and press Enter, or just
press Enter.
(M,D,DB,DM,T,[Q]) : M
Select manager (0-3,[Q=Quit]) : 1
Name
: BSM_1
([Unchange]) :
(Enter)
IP address
:
([Unchange]) : 192.168.0.253
Alert level
: All
(0=All,1=Alert,2=Information,3=Disable,[Unchange]) : 1
-- Manager setting --
No. Name
IP address
--- --------------- --------------- -----------
0 BSM_0
192.168.
1 BSM_1
192.168.
2
-------------
-------------
3
-------------
-------------
Confirm? (Y,[N]) : Y
(Enter)
- Writing setting was completed.
Hit enter key.
(Enter)
If you type D in the BSM command menu and press Enter, you are asked to select a
SC/BSM connection setting. At the prompt, enter a SC/BSM connection setting number,
and the changed setting is displayed. A confirmation message appears. Type Y and
press Enter, and the deleted SC/BSM connection setting is saved. To cancel the
setting, type N and press Enter, or just press Enter.
SC/BSM name
SC/BSM IP address
Alert level to notify SC/BSM
(Enter)
(Enter)
0.
0.
0.
0
(Enter)
Alert level
0.254 All
0.253 Alert
---------
---------
938
Description
(Enter)