Hitachi Compute Blade 2000 User Manual page 1105

2 Configure settings for LPAR manager system time zone and for LPAR manager
system time synchronization with NTP.
LPAR manager firmware version 58-6X/78-6X or earlier
Go to the Date and Time screen.

Press F7: Change System Time Zone to display a subscreen. Set your time

zone on the subscreen and press Enter.
|+- System Date and Time -----------------------------------------------------+|
|| Date and Time yyyy/mm/dd hh:mm:ss Time Zone + 9:00
|+----------------------------------------------------------------------------+|
|
+------------------------------------------------------------------------------+
LPAR manager firmware version 58-7X/78-7X or later
Go to the Date and Time screen.

Press F7 key: Change System Time Zone to display a subscreen. Set your

time zone on the subscreen and press Enter.
|+- System Date and Time -----------------------------------------------------+|
|| Date and Time yyyy/mm/dd hh:mm:ss Time Zone + 9:00
|+-Setting--------------------------------------------------------------------+|
|| Import Config None
|| TimeSync Disable
|+----------------------------------------------------------------------------+|
Point the cursor on Timesync on the Date and the System screen and press

Enter to display a subscreen. Select SVP and press Enter.
|| 7
|| 8
|| 9
|| 10
|+---------------------------|
|
|+- System Date and Time ----+-------------------+----------------------------+|
|| Date and Time yyyy/mm/dd hh:mm:ss Time Zone + 9:00
|+-Setting--------------------------------------------------------------------+|
|| Import Config None
|| TimeSync Disable
|+----------------------------------------------------------------------------+|
Confirm that the NTP setting is SYNC on the System Service State screen.

|+- System Service--------------------++-- Virtual LAN Segment State----------+|
|| SVP Access : RUN
|| BSM Access : RUN
|| HA Monitor : RUN
|| NTP : SYNC
|| Force Recovery ||
|+------------------------------------++--------------------------------------+|
+-------------------+
| Select NTP Server |
| |
| Disable |
NTP |----------------------------+|
| SVP |e Up / [PageDown]:Page Down |
|| PORT#/NIC# : V 1 2 3 4 5 6 ||
|| a : S S
|| b : S S
|| c : S
d : S
1054
Adjust LPAR Time ||
|
Adjust LPAR Time ||
||
||
||
||
||
||
Adjust LPAR Time ||
||
||
||
||
||
||