Backing Up And Restoring Settings - Hitachi Compute Blade 2000 User Manual

Backing up and restoring settings

 DC command
Restores settings to factory defaults. For server blades, only information that is set on
the following screens of the server blade Web console is initialized.
Language setting
Configuration of network
User account settings
Enter DC at the prompt, and press Enter.
5713RF0 NNNNN(0)SVP> DC(Enter)
<< DC - Restore factory setting. >>
-- Restore setting menu --
R. Restore factory setting.
B. Reset server blade web console setting.
H. Reset LP setting.
Q. Quit.
(R,B,H,[Q]) :
Select a menu item from the following list to execute the function.
Menu
R. Restore factory setting.
B. Reset server blade web
console setting.
H. Reset LP setting.
Q. Quit
If you enter R at the DC command menu and press Enter, a warning message
appears indicating that if you proceed, the current session will be terminated and the
management module will restart with the factory defaults. To restore the management
module to the defaults and restart, enter Y at the confirmation prompt and press Enter.
To cancel the operation, at the confirmation prompt, enter N and then press Enter, or
simply press Enter.
(R,B,H,[Q]) : R (Enter)
WARNING : If confirm, this connect is lost.
Confirm? (Y,[N]) : Y (Enter)
- <Management module0> Restarting
Description
Restores the settings of the management module to the
factory defaults.
Resets the settings for the server blade web console.
Information set on the following screens is reset.
- Language setting
- Configuration of network
- User account settings
Reset the LPAR manager configuration information to the
factory settings.
Quits the DC command.
643