Hitachi Compute Blade 2000 User Manual page 1500

Message content
Explanation The number of the specified VLANID exceeds 16.
LPAR manager Either automatically modifies the specified VLANID to be less than 16,
operation or keeps the message subscreen on the terminal display until the Esc
key is pressed.
What to do Change the VLANID to be less than 16, or cancel the VLANID setting
operation by pressing the Esc key.
Message content Over the maximum number of activated LPARs(X).
Explanation The LPAR cannot be activated because it is beyond the max number
(X) of LPARs to activate. (X) shows the number of LPARs.
LPAR manager Aborts the LPAR activation.
operation
What to do Deactivate an LPAR currently activated, and then activate the LPAR
again.
Message content Press any key first. Then press the F10 key next.
Explanation To make the changed setting effective, you need to press the F10 key.
LPAR manager Waits for the F10 key to be pressed.
operation
What to do Press any key, wait for the output message to disappear, and then
press the F10 key.
Message content
Explanation Locking resources failed when you updated configuration information.
Locking resources failed when you performed a system or LPAR
operation.
Locking resources failed when you updated the RAR of a NIC.
LPAR manager Aborts the specified process.
operation
What to do Retry the specified process.
Message content
Explanation Sampling time setting failed in LPAR Usage screen.
LPAR manager Aborts the sampling time setting.
operation
What to do Set a number between 1 and 60.
Save Configuration request (F9 Key) is already accepted.
Message content
Explanation The Save Configuration request has already been accepted. Wait a
moment.
LPAR manager Aborts the specified process.
operation
What to do Wait until the LPAR manager configuration information begins to be
saved.
Over Max VLAN ID count (16).
Resource lock failure.
Sampling time Error
Please wait.
1449