Hitachi Compute Blade 2000 User Manual page 1185

8 On the screen displayed at the logical BIOS boot, select Continue.
Hitachi Compute Blade E55 HVM LPAR
Intel(R) Xeon(R) CPU
(IA32.UEFI) Ver: 1.20
Continue
Boot Maintenance Manager
^v=Move Highlight <Enter>=Select Entry
The operation after OS booting is basically the same as

that for Basic.
Be sure to allocate adequate resources to the LPARs to

operate the OS, middleware, and applications used.
For details, see the Hitachi Compute Blade 2000
Software Guide and the manuals for each product.
Make sure to reset Boot Order after booting the EFI

Shell. Otherwise the OS will not boot. Especially when
booting the OS after the LPAR Auto Activate, sure to
check if the guest OS boots up.
When multiple devices installing the OS in the File

Explorer are displayed, find out the target device from
WWN or LUN on the display. WWN is
0x50060E801025A260 for Fibre
(0x50060E801025A260, 0x0); 0x0 for LUN.
E5504 @ 2.00GHz 1.99 GHz
This selection will
direct the system to
continue to booting
process
1134