Hitachi Compute Blade 2000 User Manual page 1329

# Title Official Name
(17) Grp Selecting
processor
groups to
display
(18) Ded LPAR Dedicated
Total LPAR Total
(19) Shr LPAR Shared LPAR
Total Total
(20) LPAR Total LPAR Total
(21) SYS1 SYS1
Description
Selects processor groups to display.
All: Displays the entire system
The number of a processor group: Displays specified
processor groups
Note: When a processor group number is specified,
information on the group is displayed.
Displays various totals of LPARs in the dedicated mode. ---
"---" is displayed for SrvRatio and Srv(%).
Srv(ms) displays the total service time of LPARs in the
dedicated mode.
Dsp(ms) displays the total execution time of LPARs in
dedicated mode.
Busy(%) displays the busy ratio of all LPARs in the
dedicated mode. this value is obtained by the following
formula.
Busy(%) = All execution time of LPARs in the dedicated
mode ÷ All service time of LPARs in the dedicated mode
x 100
Displays various totals of LPARs in the shared mode.
SrvRatio displays SrvRatio totals of LPARs in the shared
mode.
Srv(%) displays Srv(%) total value of LPARs in the
shared mode. If the displayed values include Srv(ms)
with '*' in LPARs in the shared mode, this value has '*'.
Srv(ms) displays the total service time of LPARs in
shared mode. when SRV(%) with * is included, * is
displayed in that value.
Dsp(ms) displays the total execution time of LPARs in
shared mode.
Busy(%) displays the busy ratio of all LPARs in the
shared mode. This value is obtained by the following
formula.
Busy(%) = the total execution time of all LPARs in the
shared mode ÷ Service time of all LPARs in the
dedicated mode x 100
Displays various totals of all LPARs.
Dsp(ms) displays the total execution time of LPARs.
Busy (%) displays the total busy ratio value of all LPARs.
Busy (%) = total execution time of all LPARs ÷ system
service time x 100
Displays the execution time and the busy ratio of the
LPAR manager System1.
LPAR manager System1 refers to the processing by the
kernel of the LPAR manager.
Note:
The busy ratio and execution time of the faulty processor
isolated are contained in SYS1.
Dsp(ms) displays the execution time of the LPAR
manager System1.
Busy(%) displays the busy ratio of the LPAR manager
System1. This value is obtained by the following formula.
Busy(%) = execution time of the LPAR manager
System1 ÷ system service time x 100
1278
Initial Value
All
---
---
---