Hitachi Compute Blade 2000 User Manual page 948

If you type PS in the PS command menu and press Enter, the power supply module
information is displayed. The screen display may be different depending on your
configuration.
-- Sensors of Power supply module1 --
Main 12V
Input
-- Current data of Power supply module1 --
Name
Slot
Total Power
AC Input Power
DC Output Power
If you type F in the PS command menu and press Enter, the fan module information is
displayed. The screen display may be different depending on your configuration.
-- Sensors of Fan module0 --
FAN0
FAN1
-- Current data of Fan module0 --
Slot
Nameplate Power
 DF command
Information on internal modules is displayed. Type DF at the prompt, and press Enter.
5713RF0 NNNNN(0)IOEU> DF
<< DF - Show field replaceable unit information. >>
-- Detail field replaceable unit information menu --
C. I/O slot expansion unit chassis.
M. I/O module main board.
R. I/O module riser board.
PS. Power supply module.
T. Show mass of modules.
A. All module.
Q. Quit.
(C,M,R,PS,T,A,[Q]) :
Select a menu item from the following list to execute it.
Menu
C. I/O slot expansion unit
chassis
M. I/O module main board
R. I/O module riser board
PS. Power supply module
T. Show mass of modules
A. All module
Q. Quit
: 1.50(A)
: 0.50(A)
:
: 1
: 1000(W)
: 50(W)
: 16(W)
: 1929(rpm)
: 1917(rpm)
: 0
: 38(W)
(Enter)
Displays chassis information.
Displays I/O module main board information.
Displays I/O module riser board information.
Displays power supply module main board information.
Displays information on module mass.
Displays information on all modules.
Quits the DF command.
897
Description