Hitachi Compute Blade 2000 User Manual page 1232

# Title Full name
(11) Error event Error event
detected detection
#
Title
Activate
(1) # -
(2) Name -
(3) Sta -
(4) Scd -
(5) Pro -
(6) Grp -
(7) Logical Processor
-
Number
(8) Logical Processor Standard server blades with LPAR manager firmware 58-2X or earlier
Number versions/ High-performance server blades with LPAR manager firmware
78-2X or earlier versions
-
Standard server blades with LPAR manager firmware 58-3X or later
versions/ High-performance server blades with LPAR manager firmware
78-3X or later versions
∆
Changeable in
shared mode
: can be changed
(1) How to a physical processor to a logical processor in the dedicated mode
Any physical processor can be assigned to the logical processor in the shared
mode.
Open the Logical Processor Configuration screen.
Place the cursor on the intersection between the LPAR column and the logical
processor number row, and press Enter to display the subscreen. Enter the
physical processor number, and press Enter.
Standard server blades with LPAR manager firmware 58-2X or earlier
versions/ High-performance server blades with LPAR manager firmware
78-2X or earlier versions
Deactivate the LPAR and set it in the dedicated mode before executing this setting.
Description
Displays that LP system logs of the error level are detected.
When this is displayed, check the LP system log in the LP
System Logs screen.
See LP system logs for checking LP system logs.
To delete this display, press the ESC key with this screen or
open the system logs screen.
Guest status
Deactivate
- -
- -
- -
- -
- -
- -
- -
∆ -
-

∆
-: cannot be changed : can be changed with conditions
1181
Initial value
(LPAR
added)
Remarks
Failure
Display only
Display only
Display only
Display only
Display only
Display only
Display only -
Changeable in the
dedicated mode