Hitachi Compute Blade 2000 User Manual page 1390

High-performance server blade with LPAR manager firmware version 78-4X or later
versions
You can enable the virtual COM console for LPARs on Logical Partition configuration
screen of LPAR manager screens. Place the cursor on the VC column of an LPAR line
which you need to enable the virtual COM console, and press the F1 key to display a
subscreen. Select a VC number to connect by moving the cursor with arrow keys, [↑] or [↓],
and press Enter. This allows you to connect to the LPAR guest screen via telnet. A TCP
port is displayed, which is used to connect to Comment when you place the cursor the VC
column of the LPAR line via telnet. This TCP port is used in "(2) Connecting to LPARs".
This operation can be done regardless of the status of an LPAR, active or deactive, at any
time.
+-----------------------+-----------------------------+------------------------+
|+- Logical Partition(LP|
|| # Name Sta Scd |
|| 1 LPAR1 Act D |
|| 2 LPAR2 Dea D |
|| 3 LPAR3 Dea D |
|| 4 LPAR4 Dea D |
|| 5 |
|| 6 |
|| 7 |
|| 8 |
|| 9 |
|| 10 |
|| |
|+----------------------|
|+- Logical Information |
|| Pro |
|| Assign Total 5 |
|| Act Total 2 |
|| Remain |
|+----------------------|
| Virtual Console(TCP P+-----------------------------+
+-----------------------| F1:Allocated VC Information |------------------------+
| F2:Mem Alloc Dsp F3:+-----------------------------+ F7:Remove
+------------------------------------------------------------------------------+
LPAR1 Virtual Console |-----------------------+|
|A AC PC VC PB
VC TCP Port |* N * N BIOS
N 0 |* N * N BIOS
1 20801 |* N * N BIOS
2 20802 |* N * N BIOS
3 20803 |
4 20804 |
5 20805 |
6 20806 |
7 20807 |
8 20808 |
9 20809 |/ [PageDown]:Page Down ||
10 20810 |-----------------------+|
11 20811 |Physical Information --+|
12 20812 |ser Memory : 4608
13 20813 |rocessors
14 20814 | Shared
15 20815 | Dedicate : 2
16 20816 |-----------------------+|
1339
||
||
||
||
||
||
||
||
||
||
||
||
: 8(8) ||
: 0 ||
||
|
Esc:Menu |