Hitachi Compute Blade 2000 User Manual page 1300

Hide thumbs Also See for Compute Blade 2000:
Table of Contents

Advertisement

Make sure that time synchronization settings for import
sources have no problem when importing the time
synchronization settings from SVP or BMC.
When you select SVP as the import source, use the
management module version A0182 or later. If not, the
import fails.
When you select SVP as the import source, NTP server
settings of NTP server 2 and NTP server 3 for SVP time
are not be imported.
If the imported NTP server setting is a domain name, it
is ignored by LPAR manager. Only an IP address is
available as the NTP server setting.
Only "hours" is effective as the imported item in LPAR
manager, "minutes" is not.
Daylight saving time is not supported.
(9) How to operate LPAR manager using NTP
LPAR manager firmware version 58-7X/78-7x or later
(a) Time synchronization with a management module. (recommended)
Shut down all OSs.
On the Date and Time screen, place the cursor on LPAR RTC and press
Enter to open the subscreen. Select LPAR SEL Time and press Enter.
+------------------------------------------------------------------------------+
|+- Logical Partition(LPAR) Date and Time ---------------- LPAR RTC
|| # Name
Sta Time Mode
|| 1 LPAR1
Dea ----------- yyyy/mm/dd hh:mm:ss ------
|| 2 LPAR2
Dea ----------- yyyy/mm/dd hh:mm:ss ------
|| 3
|| 4
|| 5
|| 6
|| 7
|| 8
|| 9
|| 10
|+---------------------| Last Deactivated
|
|+- System Date and Tim+--------------------------------+---------------------+|
|| Date and Time
yyy| Display LPAR SEL Time
|+-Setting-------------+--------------------------------+---------------------+|
|| Import Config None
|| TimeSync
Disable
|+----------------------------------------------------------------------------+|
|
+------------------------------------------------------------------------------+
| F6:Change System Date and Time F7:Change System Time Zone
+------------------------------------------------------------------------------+
Date and Time
Time Zone
+--------------------------------+
|
Select Display Time
|
| LPAR RTC
| LPAR SEL Time
| Last Activated
| RTC Last Modified
1249
-+|
||
||
||
||
||
||
|
||
|
||
|
||
|
||
|
||
|---------------------+|
|[PageDown]:Page Down |
|0
Adjust LPAR Time ||
||
||
|
Esc:Menu |

Advertisement

Table of Contents
loading

Table of Contents