Hitachi Compute Blade 2000 User Manual page 1411

In the network where the management server is connected to multiple segments, give
priority to the NIC port on the management server that is used for the HvmSh command,
and register the route on the routing table. Then, the registered route is used for all
communication from the management server to LPAR manager.
Management server
PFM Agent HvmSh command
IP address
(192.168. 0 .1)
NIC#0
Prioritized
Segmen t A
IP address
(192.168.0.254 )
Router
Segment B
Segment B
NIC
(172.16.0.2)
LPAR manager
BSM IP address 1 (192.168.0.1)
BSM IP address 2
BSM IP address 3
BSM IP address 4
Routing table:
[Example 1]
route -p add 172.16.0.2 mask 255.255.255.254 192.168.0.254
[Example 2]
route -p add 172.16.0.2 mask 255.255.255.255 192.168.0.254
route -p add 172.16.0.3 mask 255.255.255.255 192.168.0.254
To execute HvmSh command on PFM with the HvmSh command, copy the HvmSh
command stored in the HVM Navigator CD into the specified PFM folder. GUI operation
from PFM can display statistics information in a graph or table in the Web browser.
See the PFM manual for further details.
The following versions are required for executing HvmSh command on PFM.
PFM
09-10 or later versions
With LPAR manager not supporting LP CLI IP Address,

set the IP address of the management server to BSM IP
Address.
With LPAR manager supporting LP CLI IP Address, set

the IP address of the management server to LP CLI IP
Address. Setting the management server IP address to
BSM IP Address.
Other applications
Routing table
IP address
( 172 .16. 0 .1)
NIC#1
Segment B
Segment B
NIC
(172.16.0.3)
LPAR manager
BSM IP address 1(192.168.0.1)
BSM IP address 2
BSM IP address 3
BSM IP address 4
HvmSh command LPAR manager
4.0 or later versions 57-30 or later versions
1360