Hitachi Compute Blade 2000 User Manual page 1327

The following table describes each item on this screen.
# Title Official Name
(1) # LPAR number Displays the LPAR numbers between 1 and 16.
(2) Name LPAR name
(3) Shr Number of
shared
processors
(4) Ded Number of
dedicated
processors
(5) Scd Scheduling
Mode
(6) Pro Logical
Processors
(7) Grp Processor
Group
(8) SrvRatio Service Ratio
(9) Srv(%) Service
Percentage
(10) Srv(ms) Service time
(ms)
(11) Dsp(ms) Dispatch time
(ms)
(12) Busy(%) LPAR Busy (%) Displays the busy ratio of the LPAR. This value is the
Description
Displays the LPAR name.
Displays the number of shared processors when the
LPAR is in the shared mode. Displays "-" when the LPAR
is in the dedicated mode.
Displays the number of dedicated processors when the
LPAR is in the dedicated mode. Displays "-" when the
LPAR is in the shared mode.
Displays a scheduling mode.
S: Shared mode
D: Dedicated mode
Displays the number of logical processors.
Displays a processor group number
Displays the service ratio of the LPAR when the LPAR is
in the shared mode. The values in the field are set with
Service Ratio (Srv) on the LPAR Configuration screen.
Grp (ALL): "---" is displayed
Displays "---" when the LPAR is in the dedicated mode.
Grp (ALL): "---" is displayed
Displays the proportion of the LPAR's service time to the
service time of physical processors running correctly that
are assigned to the shared mode LPAR.
If the Service Percentage calculated inside LPAR
manager does not match, the specified Service Ratio, "*"
is displayed on the right side. If it does match, "*" is not
displayed.
Grp (ALL): "---" is displayed
Displays "---" when the LPAR is in the dedicated mode.
Grp (ALL): "---" is displayed
Displays the total service time of the LPAR in
milliseconds.
If the LPAR is in the dedicated mode, this value is
obtained by the following formula.
Srv(ms) = the number of physical processors running
properly on the LPAR x 1000ms
If the LPAR is in the shared mode, this value is obtained
by the following formula.
Srv(ms) = the number of shared physical processors
running properly x Srv(%) of the LPAR x 1000ms
If the LPAR is in the shared mode and Srv(%) is
displayed with "*", "*" will be also displayed in the right
side of this field.
Displays the execution time of the LPAR in milliseconds.
This value is the total execution time of the logical
processors on the LPAR.
proportion of execution time to the LPAR's service time,
and is obtained by the following formula.
1276
Initial Value
-
NO_NAME
-
-
-
-
-
---
---
---
---
---