Hitachi Compute Blade 2000 User Manual page 695

If you enter B at the DC command menu and press Enter, you are prompted to select
a partition. After you enter a partition number and press Enter, a confirmation message
appears. To reset the server blade web console to the defaults, enter Y at the
confirmation prompt and press Enter. To cancel the operation, enter N at the
confirmation prompt and press Enter, or simply press Enter.
(R,B,H,[Q]) : B (Enter)
Select partition (0-7,[Q=Quit]) : 0 (Enter)
Confirm? (Y,[N]) : Y (Enter)
- <Partition0> Resetting server blade web console setting was completed.
Hit enter key. (Enter)
If you enter H at the DC command menu and press Enter, you are prompted to select
a partition. After you enter a partition number and press Enter, a confirmation message
appears. To reset the LPAR manager configuration, enter Y at the confirmation prompt
and press Enter. To cancel the operation, enter N at the confirmation prompt and press
Enter, or simply press Enter.
(R,B,H,[Q]) : H (Enter)
Select partition (0-7,[Q=Quit]) : 0 (Enter)
Confirm? (Y,[N]) : Y (Enter)
- <Partition0> Resetting LP setting was completed.
Hit enter key. (Enter)
Do not perform H. Reset LP setting of this command to a
partition on which LPAR migration has been performed. See
Chapter 12: Logical partitioning manager for further
information.
644