Hitachi Compute Blade 2000 User Manual page 1127

3 Reflect the changed scheduling mode of the PCI device into the LPAR manager
system. Press the F10 key to display the Save settings? subscreen. Select Yes
and press Enter.
+------------------------------------------------------------------------------+
|+- PCI Device Assignment ----------------------------------------------------+|
||
|| PCI Device#: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
|| Type: U N N N N N
|| Schd: E S+ D+ S+ S+ S+
|| # Name Sta
|| 1 LPAR1 Dea A - - - - -
|| 2 LPAR2 De+--------------------------------------------+
|| 3 LPAR3 De|
|| 4 LPAR4 De| This operation will require a few minutes. |
|| 5 |
|| 6 |
|| 7 |
|| 8 +--------------------------------------------+
|| 9 | Save all changes
|| 10 +--------------------------------------------+
||
|+----------------------------------------------------------------------------+|
|+-Selected PCI Device Information--------------------------------------------+|
|| # Vendor Device Name
|| 2 Intel Corp. GbE Controller
++----------------------------------------------------------------------------++
| F5:Attach/Detach F10:Update PCI Dev Schd F11:Left F12:Right
+------------------------------------------------------------------------------+
4 After a couple of minutes, the Config Changing message appears.
+------------------------------------------------------------------------------+
|+- PCI Device Assignment ----------------------------------------------------+|
||
|| PCI Device#: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
|| Type: U N N N N N
|| Schd: E S+ D+ S+ S+ S+
|| # Name Sta
|| 1 LPAR1 Dea A - * - - -
|| 2 LPAR2 Dea A - * - - -
|| 3 LPAR3 Dea A - * - - -
|| 4 LPAR4 Dea A - * - - -
|| 5
|| 6
|| 7
|| 8
|| 9
|| 10
||
|+----------------------------------------------------------------------------+|
|+-Selected PCI Device Information--------------------------------------------+|
|| # Vendor Device Name
|| 2 Intel Corp. GbE Controller
++----------------------------------------------------------------------------++
| F5:Attach/Detach F10:Update PCI Dev Schd F11:Left F12:Right
+------------------------------------------------------------------------------+
When the port status of a shared FC is LinkDown, it takes a
different time required for changing the scheduling mode of a
PCI device depending on the number of ports with LinkDown.
See Shared FC port status for
Save settings?
Yes
No
[PageUp]:Page Up / [PageDown]:Page Down ||
Slot# Bus# Dev# Func# ||
E00
+-----------------+
| Config Changing |
+-----------------+
[PageUp]:Page Up / [PageDown]:Page Down ||
Slot# Bus# Dev# Func# ||
E00
details.
1076
||
||
||
||
||
||
||
| ||
||
| ||
| ||
| ||
||
| ||
||
62 0 0 ||
Esc:Menu |
||
||
||
||
||
||
||
||
||
||
||
||
||
||
||
62 0 0 ||
Esc:Menu |