Hitachi Compute Blade 2000 User Manual page 1563

(3) Check the settings and enter Y at the confirmation prompt Confirm?
Select manager (0-3, [Q=Quit]): 0
Name : BSM_0
([Unchange]):
IP address : 0. 0. 0. 0
([Unchange]): 192.168.0.20
Alert level l: All
(0=All, 1=Alert, 2=Information, 3=Disable, [Unchange]):
-- Manager setting --
No. Name IP address
--- ------------- --------------- -----------
0 BSM_0 192.168.
1 ----------- --------------
2 ----------- --------------
3 ----------- --------------
Confirm? (Y, [N]): Y
Item
Name
IP address
Alert level
Set chassis ID before setting destination BSM. If changing
the chassis ID after setting BSM, delete and re-register the
host, LPAR manager, server chassis, and IOEU on BSM.
Refer to the BSM manual.
If not, the chassis ID information before the change
remains on BSM, for which BSM chassis management
may not work properly.
If you change the Alert Port setting in the BSM settings
from the default (20079), you must change the setting in
the BSM services file. You can edit the Alert Port setting by
selecting "DM. Show/Edit manager detail setting."
For details, see the BSM documentation.
Alert level
0. 20 All
---------
---------
---------
Description
Set the host name of the BSM.
Set the IP address of the BSM.
Set the SVP alert level.
All: Report all information.
Alert: Report failures.
Information: Report information-only data.
Disable: Do not report SVP alerts.
1512