Moving from an LPAR manager screen to a guest screen
1 Press the F8 key on the LPAR manager Menu screen.
2 On the subscreen, use the cursor to select the LPAR you wish to display the guest
screen and press Enter.
+------------------------------------------------------------------------------+
|+-- Menu [LP_192168020] ----------------------------- 2009/02/18 13:28:33 -+ |
||
|| Logical Partition Configuration
|| Logical Processor Configuration
|| Physical Processor Configuration
|| PCI Device Information
|| PCI Device Assignment
|| VNIC Assignment
|| Shared FC Assignment
|| Allocated FC Informatio|
||
|+-------------------------| 2
|
|+-- Tips -----------------| 4
|| F3 : Activate
|| F4 : Deactivate
|| F5 : Reactivate
|| F6 : Add Definition
|| F7 : Remove
|+---------------------------------------------------------------------------+ |
| Operation confirmation and demo setting
+------------------------------------------------------------------------------+
*
If the LPAR has the virtual COM console enabled, you can access the LPAR
manager screen from the virtual COM console.
See
Virtual COM console function
System Configuration
System Service State
Date and Time
LP Options
LPAR Usage
+------------------------+
| Call LPAR Guest Screen |s
|on Information
| 1 LPAR1
|
|------------------------+ |
| 3
|
|------------------------+ |
+------------------------+
F9 : Save Configuration
Alt + t : Screen Refresh
Alt + r : LP System Shutdown
for how to use the virtual COM console.
1151
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
|
| |
| |
| |
| |
| |
|