Hitachi Compute Blade 2000 User Manual page 1308

When you change the LPAR manager display time

without synchronizing the LPAR manager system time
with NTP server, the LPAR manager display time and
LPAR manager system time is different. Thus, you
cannot determine the time for Adjust LPAR Time on the
LPAR manager screen.
Changing the LPAR manager display time does not

affect the LPAR manager system time. To change the
LPAR manager system time, change the system
equipment time or synchronize the LPAR manager
system time with the NTP server.
Before starting LPAR manager, we recommend that you

set your server's system date to a year between 2000
and 2037. Otherwise, we cannot guarantee normal
operation of the date and time configuration on this
screen.
LPAR's SEL time and LPAR manager display time can
be set at any year between 2000 and 2099 AD. We
cannot fully guarantee normal operations of LPAR
manager date and time processing if a year later than
2037 is set. Therefore, make sure to set a year to 2037
or earlier for any type of date and time settings while you
are running LPAR manager.
Set a system time zone to the SEL time zone. If not, the

SEL time of an LPAR might display a different time,
which causes an incorrect time for a failure.
1257