Hitachi Compute Blade 2000 User Manual page 1313

# Title Official Name
(17) LP Timer counter
TimerCounter base
Base
(18) Save Time Saving time
Config configuration
automatically
(19) Error Event Error event
Detected detection
Description
LPAR manager firmware version 59-2X/79-2X or
later
Sets a value for timer counter calculation.
TSC: Based on TSC (default)
CPU frequency: Based on CPU frequency
* TSC is the default value due to compatibility with
the former LPAR manager firmware version. CPU
frequency has a higher precision basically, but
precision depends on the system environment.
Select a more precise one when operating the
system.
LPAR manager firmware version 59-41/79-41 or
later
Sets whether or not to automatically save adjusted
time configuration of LPAR manager system time
and LPAR time in physical RTC and LPAR
manager configuration information.
Enable: Enables the Save Time Config.
Disable: Disables the Save Time Config.
Displays that LP system logs at the error level are
detected.
When this is displayed, check the LP system log in
the LP System Logs screen.
See LP system logs for checking LP system logs.
To delete this display, press the Esc key with this
screen or open the system logs screen.
1262
Initial
Value
TSC
-