Hitachi Compute Blade 2000 User Manual page 1094

PCI Error
Handling Mode
*4 When using PCIe Error Isolation, use the following firmware versions.
Standard server blades with EFI 03-43/04-43 or later; BMC 03-78 or later
High-performance server blades with EFI 03-17/04-17 or later; BMC 04-33 or later, or 06-01
or later
See Chapter 13: System Operation and Management > PCI Error Handling Mode for details.
*5 When setting NUMA to Socket Interleave, you need to assign memory and a processor
carefully considering the features. Non-NUMA is basically recommendable.
When you have confirmed that EFI settings are correct, click Modify.
Behavior at PCIe failure
LPAR manager
unavailable.
Redundant NIC:
IP address and MAC remain
available due to bus
replacement. Maintenance in
operation is available.
Non-redundant host bus
adapter (HBA):
Hangs up or reboots forcibly
because no dump is
obtained due to the HBA
unavailable.
Redundant HBA:
Does not go down due to bus
replacement. Maintenance in
operation is available.
1043
Guest OS